Reddit reviews Ketofa 12V 24V Male Car Cigarette Lighter Socket Plug Connector On Off Switch 3m
We found 4 Reddit comments about Ketofa 12V 24V Male Car Cigarette Lighter Socket Plug Connector On Off Switch 3m. Here are the top ones, ranked by their Reddit score.
Red wire is for positive terminal while black for negative terminal.3m high quality copper wire with switch, Line nose aperture is 6.3 mm.Protect the circuit. With 5A fuse.The Cigarette lighter plug apply to almost all models of cigarette lighter socket.Can be used to connect the car electrical products.Package content:1x Car Motorcycle Cigarette Lighter Power Plug.
You should definitely be able to wire it to the fuse block if you really want to go that route.
But if you would prefer to go the cigarette lighter route I would recommend something like this.
It has a convenient on/off switch too so you can leave it plugged in.
If you really want to rig one yourself the center springy metal piece should be 12v positive, you would probably need to run the red and white wires to that. The side springy piece will be "ground", black wire will go to that.
the loop of wire creates a magnetic field which heats the cap
There are guys on fc that have made these into vapcap heaters ( I think a guy by the name of Pipes even sells some)
You can get the heater for cheaper from ebay/china, but amazon has faster shipping on that link. I also am lazy so
https://www.amazon.com/gp/product/B06XBY66R5/ref=oh_aui_detailpage_o09_s02?ie=UTF8&psc=1
and
https://www.amazon.com/gp/product/B00LCQZEK2/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
can be put together with no solder necessary to make an at home and in the car setup. I wrapped the coil around a 14mm/18mm glass bushing I had sitting around. I think you can get those on amazon too for ~5$
I agree with @failinglikefalling your talking about a generic 12V cigarrete device (like such https://www.amazon.com/Ketofa-Cigarette-Lighter-Socket-Connector/dp/B00LCQZEK2) commonly used to power an electrical device when the car is running. This could have been used to wire a dash cam, CD player, radar detector, etc. If the device was "hard wired" there would be a fuse-wire attached to the fuse box and no need for the 12 V socket.
​
Cut, splice, insulate, play.