Reddit Reddit reviews LDR Industries 509 5100 Ice Maker and Humidifier Installation Kit 1/4-Inch x 25ft Flexible Hose for Potable Water Filter System, Poly Tubing

We found 3 Reddit comments about LDR Industries 509 5100 Ice Maker and Humidifier Installation Kit 1/4-Inch x 25ft Flexible Hose for Potable Water Filter System, Poly Tubing. Here are the top ones, ranked by their Reddit score.

Parts & Accessories
Appliances
LDR Industries 509 5100 Ice Maker and Humidifier Installation Kit 1/4-Inch x 25ft Flexible Hose for Potable Water Filter System, Poly Tubing
FUNCTIONALITY: This Ice Maker and Humidifier Installation Kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing water filter system.COMPATIBILITY: Supply pure water from your water filtration system to your refrigerator, water coolers dispenser, and humidifiers using our Ice Maker and Humidifier installation kit.INCLUSION: Complete set of 1/4-Inch x 25ft Polyethylene Tubing that is durable and will not corrode. Includes self-piercing saddle valve and fitting.WARRANTY: Comes with a Limited Lifetime Warranty on Ice Maker and Humidifier Installation Kit.INSTALLATION: This kit is easy to install and gets the job done fast without any inconvenience. The self-piercing saddle valve quickly penetrates your pipe to divert the water where you want it to go and without turning off your water supply. Installation instructions included.
Check price on Amazon

3 Reddit comments about LDR Industries 509 5100 Ice Maker and Humidifier Installation Kit 1/4-Inch x 25ft Flexible Hose for Potable Water Filter System, Poly Tubing:

u/SudoPoke · 11 pointsr/PlantedTank

It's actually super easy. Bought everything off amazon.

  • ice line kit, attach to your water line under sink

  • Solenoid Valve 1/4", splice 12v plug and into a timer or wifi timer.

  • Attach water line inlet to tank

  • Drill hole in tank or use overflow box for water outlet. I made my own

  • Optional, get water filter if your water is chlorinated, check valve for safety, 1 gph drip emitter for better flow control.

    I'll make a full guide later
u/TheNomadicHermit · 8 pointsr/Autoflowers

What do you want to know?

I will give you 3 pointers if you buy this particular unit, though. I only bought this because it's the cheapest 4 stage you can get, and I know I don't need all the bells and whistles (in-line TDS, etc -except one that I will mention in part 2 below) that come with the ones that cost way more.

  1. If you want to make serious quantities of water, and you don't have the patience of a saint, get THIS MEMBRANE and just keep the included 50gpd membrane as a spare. The dow filmtec membranes are the best you can get. They're the only ones that really produce anywhere close to their stated GPD rating. The 75GPD membrane is great too. Honestly it's just a more convenient, and longer lasting membrane either way. I've gone through a shitload of RO membranes. Whenever I need a replacement, the filmtec 75 is what I buy.

  2. If you're installing it on a bathroom sink that has easily accessible male threading (after you remove the aerator), then get one of THESE. It's much easier to just divert the faucet water to your 1/4" tubing than having to detach and reattach the included plastic faucet adapter every time you want to make water. If you want to cut the faucet out of the picture altogether (my preferred method) then install a SADDLE VALVE straight to your 1/2" copper pipe (cold water pipe ONLY - never connect an RO/DI to hot water) and a SHUTOFF VALVE in-line between the pipe and your RO/DI's supply port. That's what I did today. Tapped into the copper pipe behind my bathroom sink; drilled a hole in the wall just above the sink and ran the tubing into the bathroom; installed shutoff valve there; drilled holes in undersink cabinet to accommodate supply, waste, and clean tubes; mounted the filter unit inside the undersink cabinet. Now I have a convenient on/off switch just above my bathroom sink. The tubing for waste and clean are coiled up between the cabinet and my tub. When I want to make water I just snake the waste line down my bathtub drain, pop my water sprayer in the tub and fill her up. No worries of spills/overflow. No hassle of connecting/disconnecting plastic fittings that are prone to thread strip.

  3. Doesn't hurt to install a BACKFLUSH. This is the one 'bell and whistle' that I think is actually really useful. Especially if you have really hard water, It's good to flush heavy solids out of your membrane occasionally.
u/KarmaEeleon · 0 pointsr/Plumbing

A dishwasher supply line is 3/4" hose bibb to 3/8" compression. They are usually a few feet long. Make sure the Y splitter has deep enough threads to compress the neck of the hose bibb into the collar.

Reduce 3/8" comp to 1/4" comp, then run 1/4" flexible tubing to your fridge. A kit at the big box near me is about $15 for the 25' poly tubing kit with 1/4 and 3/8 adapters. A 1/4 coupling can be used to connect two lengths of tubing if you are forced to do so.

HB to comp
3/8 to 1/4
ice maker kit

The kit comes with a saddle valve, but you don't need it.