Reddit reviews LEDwholesalers 16.4 Feet (5 Meter) Flexible LED Light Strip with 300xSMD3528 and Adhesive Back, 12 Volt, White 6000K, 2026WH
We found 10 Reddit comments about LEDwholesalers 16.4 Feet (5 Meter) Flexible LED Light Strip with 300xSMD3528 and Adhesive Back, 12 Volt, White 6000K, 2026WH. Here are the top ones, ranked by their Reddit score.
Efficient LED strip with 300xSMD3528 LEDsCuttable every 3 LEDs, approx. every 2", at designated cut marksCut sections may be linked via optional quick conectors or directly soldering wiresDimmable with optional compatible dimmable transformer and wall dimmer switch or PWM dimmersEco-friendly - uses very little energy, without harmful radiations
Get a strip of LED lights off Amazon and a 12v battery pack. Attach to Hulu Hoop. Done? For example, http://www.amazon.com/LEDwholesalers-Flexible-300xSMD3528-Adhesive-2026WH/dp/B002Q8V8DM -- they're cheap and standard items.
maybe put some LEDs going around the inside of the frame to light it from behind
They were pretty cheap on Amazon. I had a 12VDC/2A adapter laying around that I used to power them.
http://www.amazon.com/gp/product/B002Q8V8DM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Use led stripes like those:
http://www.amazon.com/LEDwholesalers-Flexible-300xSMD3528-Adhesive-2026WH/dp/B002Q8V8DM
http://www.amazon.com/gp/aw/d/B002Q8V8DM?pc_redir=1397701771&robot_redir=1 you could totally put those in a road bike tire and pressure wouldn't be a problem. The hardest part would be a power source but you could put coils in the hubs to generate electricity. Storing the power so that they didn't just shut of when you stopped rolling might be a challenge and you would have to put a mud guard over the front tire so you don't fucking blind your self if you look down.
Nice xmas lights. I popped these on my printer and wired up a switch:
https://www.amazon.com/LEDwholesalers-Flexible-300xSMD3528-Adhesive-2026WH/dp/B002Q8V8DM
Something like this would work
http://www.amazon.com/LEDwholesalers-Flexible-SMD3528-Adhesive-2026WH/dp/B002Q8V8DM
or you can try what Steve Ramsey did
https://www.youtube.com/watch?v=SKc9MSV1yPk
I'd suggest using LED light strips with their associated accessories on amazon. Basically you cut the strips to the length you want (at the marked cutting locations) and connect them together with the connectors they sell.
They have an adhesive back that you can use, but I suggest also stapling them as the adhesive fails over time. They have strips that are waterproof if you're concerned about that.
Tuck a dimmer & transformer in a cabinet and power the lights using an existing outlet.
waterproof LED strips of solid colors are easy to add and can run directly off a 3S (12v) battery.
https://www.amazon.com/LEDwholesalers-Flexible-300xSMD3528-Adhesive-2026WH/dp/B002Q8V8DM
But you will want to check out the different types of LED strips and see which kind you want. Different strips use different placement patterns which can affect overall brightness and power draw.
Alternatively if you have the space and equipment, you can add a dedicated BEC and use some RGB LED strips and wire them up to the FC so they can be controlled. But this becomes more difficult when you want to use a couple of small strips in a tight space.
you can wire the strips inside the case. i'm not too familiar with the noctis, but juding from pictures of it, it shouldn't be too hard to replace those lights with something like this: http://www.amazon.com/LEDwholesalers-Flexible-300xSMD3528-Adhesive-2026WH/dp/B002Q8V8DM