Reddit reviews Matek Systems PDB Supports 3S Battery for FPV Racing Drone HUB5V12V
We found 5 Reddit comments about Matek Systems PDB Supports 3S Battery for FPV Racing Drone HUB5V12V. Here are the top ones, ranked by their Reddit score.
2oz copper 4-layers PCB,size 36*36mm.Compatible with CC3D Naze32 F3 flight controller.Batteries may range from 3S to 6S LiPo.5V 12V Output LED indicators Short circuit tolerant.The HUB distributes power from a battery pack to 4 ESCs. ESC Battery solder tabs in pairs.Providing synchronised regulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc. Solder Bridges of various voltage for Camera VTX.
Sp f3
Maker fire 12amp https://www.amazon.com/gp/aw/d/B01F6WYHPU/ref=yo_ii_img?ie=UTF8&psc=1
And this is what I think caused the problems https://www.amazon.com/gp/aw/d/B01FLG0J8K/ref=yo_ii_img?ie=UTF8&psc=1
http://m.banggood.com/Matek-Systems-PDB-XT60-W-BEC-5V-12V-2oz-Copper-For-RC-Multirotors-p-1049051.html
I've always used Matek http://m.banggood.com/Matek-Systems-PDB-XT60-W-BEC-5V-12V-2oz-Copper-For-RC-Multirotors-p-1049051.html
They don't have the same one I use on there though I get mine from Amazon
https://www.amazon.com/gp/aw/d/B01FLG0J8K/ref=sxl1?qid=1465279423&sr=1&pi=AC_SX236_SY340_QL65
This [one](Crazepony Matek PDB Power Distribution Board 5V 12V BEC Output for FPV Multirotor Quadacopter ( 36mm*36mm, Version 3.1 ) https://www.amazon.com/dp/B01FLG0J8K/ref=cm_sw_r_cp_api_ri1nybR286W6Q)
4cells.
I have a Matek PDB: https://www.amazon.com/dp/B01FLG0J8K
I'm not sure if I understand what you mean by the BEC? The PDB has a 5V and 12V BEC on it. If I take everything off of the PDB except the XT60 connection and plug in the LIPO should I get any lights on the PDB? Because I don't.
Thanks
I have a stupid question about ESCs. A lot of the videos I see, it states if you have a BEC on the ESC that you need to take out one of the wires that connects to the flight controller. Well the ESC's I'm looking at
http://www.hobbyking.com/hobbyking/store/__65153__Turnigy_Multistar_20A_V2_ESC_With_BLHeli_and_4A_LBEC_2_6S.html
seems to have to be updated with their adapter (which I don't mind getting) but the adapter uses the third wire. What are my solutions here? If it matters, I'm going to be going with the SP f3 Deluxe for a FC. I might have heard wrong though about removing the wire, if I did, please let me know
Edit: I also don't know if this matters, but I plan on going with a Matek 3.1 PDB
https://www.amazon.com/dp/B01FLG0J8K/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=2CVAC8HPAQ7L6&coliid=I340F0A14LFORD