Reddit Reddit reviews Minwax 785004444 Paste Finishing Wax, 1-Pound, Natural

We found 9 Reddit comments about Minwax 785004444 Paste Finishing Wax, 1-Pound, Natural. Here are the top ones, ranked by their Reddit score.

Minwax 785004444 Paste Finishing Wax, 1-Pound, Natural
Minwax Paste Finishing Wax protects and adds hand-rubbed luster to any finished wood surface.It is recommended for furniture, antiques, woodwork, cabinets, doors, paneling and accessories that do not need a hard protective coat of polyurethane.Leaves nice polished look to any finished wood surface
Check price on Amazon

9 Reddit comments about Minwax 785004444 Paste Finishing Wax, 1-Pound, Natural:

u/ArcticBlaster · 15 pointsr/finishing

I'd get a little pot of stain in a similar but slightly lighter colour to touch-up the bits of damage, then give the whole thing a good coat of wax (this or similar)

u/skimcpip · 3 pointsr/NewAgain

Thank you for the response.

so I purchased minwax "paste finishing wax" https://www.amazon.com/gp/product/B000LNOZAW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 - think that will work?

And if I apply this (or another wax) to just the splotch from where I removed the existing wax, will the border/outline of the splotch still be apparent? Or will the new layer blend in with the old layer with no border/outline showing?

u/MakersWorkbench · 2 pointsr/DIY

This is the wax I use. http://amzn.to/28Z7uzK I give it a few good coats. On my 1948 Rockwell Jointer I only have to wax it every few months.

u/tipsyskipper · 2 pointsr/Tools

Minwax Paste Finishing Wax Natural

Just follow the directions: apply a thin coat, let it dry, and buff it.

u/caddis789 · 2 pointsr/woodworking

I wouldn't use car wax. Regular furniture wax should do fine.

u/catbot4 · 2 pointsr/diynz

I'm actually in the process of making my own following this recipe. It's basically just boiled linseed oil, gum turpentine (not mineral) and beeswax.

Expensive to make in NZ, but it'll be worth it!

Failing that there is the commonly used Minwax kind.

u/Wtrexct · 1 pointr/woodworking

You can hit that with a grinder equipped with a wire wheel to completely remove the rust and polish it up a bit. Once that is done, you can coat the underside with this:

https://www.amazon.com/gp/aw/d/B0038D3IZA/

And wax the top, miter gauge, and face of the fence with this:

https://www.amazon.com/gp/aw/d/B000LNOZAW

:)

u/bahkins313 · 1 pointr/woodworking

Minwax 785004444 Paste Finishing Wax, 1-Pound, Natural https://www.amazon.com/dp/B000LNOZAW/ref=cm_sw_r_cp_api_mUeQzbPCR5V6T


Would this work?

u/youmaycallmejonathon · 1 pointr/woodworking

Is it this paste wax or other?