Reddit reviews Model C MagHold Magnetic Build System for FF Creator (2016 and Later), FF Dreamer and others.
We found 2 Reddit comments about Model C MagHold Magnetic Build System for FF Creator (2016 and Later), FF Dreamer and others.. Here are the top ones, ranked by their Reddit score.
Precision machined from billet aluminum. Made in USA.Complete Build System includes everything you need to get startedRemovable build plate for easier access to your print.Prints pop off the tempered steel Spring Plate with a bend and a twist.Model C fits printers FF Creator (2016models and later), FF Dreamer and others with 1 in front, 2 in back mounting configuration.
I have a flashforge creator dual and my build plate was a little warped. I think the problem is the stock one is just too thin. Part of my problem I think was related to the plastic arms that support the build plate also warping at different bed temps, causing the warped bed. I switched to a maghold build plate and haven't had any problems since.
I had to get model A but I think your printer would need model C.
Here is the amazon link if you want to check it out.
Edit - you could check with a straight edge and a flashlight to check for the warp. I could see my warp just by getting eye level with the build plate.
Another thing you could check if the build plate turns out to actually be flat is taking off the x and y axis rods and rolling them on a flat surface to check for a bend. I would check x axis first because it is the longest and most likely to bend from the weight of the extruder.
Flash Forge Creator Pro. I had a lot of problems with it out of the box with clogging in the nozzles and things sticking to the build plate. After adding a metal hotend and magnetic build plate it has worked amazingly with no issues. I see the magnetic build plate is out of stock, so not sure where you can get those now, but being able to just flex the plate and have pieces pop right off is great.