Reddit reviews PIXNOR Precision Tweezer Set - 7Pcs ESD Anti-static Tweezers Set Stainless Steel Long Tweezers with Curved, Pointed, Slanted Tips for Eyebrow, Eyelash Extension, Craft, Jewelry, Soldering & Laboratory
We found 9 Reddit comments about PIXNOR Precision Tweezer Set - 7Pcs ESD Anti-static Tweezers Set Stainless Steel Long Tweezers with Curved, Pointed, Slanted Tips for Eyebrow, Eyelash Extension, Craft, Jewelry, Soldering & Laboratory. Here are the top ones, ranked by their Reddit score.
❤【7 PCS ESD TWEEZERS SET】 - A full set of anti-static ESD precision tweezers includes major style and type of tweezers, these professional-grade tweezers close securely and give you an excellent grip on even the smallest part, material, or hair.❤【ANTI-STATIC NON-MAGNETIC TIPS】- ESD anti-static coating for effective electrostatic dissipative use, which protects electronic components from static damage during precise operation; Resistant to most acids and other corrosives.❤【MULTIFUNCATION】- These tweezers keep in a protective shell to avoid scratches and easy carrying. One set of 6 different specifications and configurations to fit all purposes you need. Excellent for electronics, medical and laboratory work, jewellery and other fine crafts.❤【PREMIUM QUALITY】 - Our tweezers are made of high-quality stainless steel, matte black coating ensures excellent non-slip handling and light reflection, non-magnetic and non-sticky, which can avoid sticking small items and resistant to most acids.❤【SAFE PROTECTION】- These tweezers are equipped with separate protective shells to prevent scratching of the human body and other items when stopped use or stored.
I'll just give you a list of the items I've been using (and like):
https://www.amazon.com/Hakko-T18-D08-D12-D24-D32/dp/B00C1N30DI Hakko FX-888D. The extra tips may be unnecessary, I only ever use the one chisel tip
https://www.amazon.com/gp/product/B00068IJPO Leaded solder
https://www.amazon.com/gp/product/B004SPGFT8 Brushes
https://www.amazon.com/gp/product/B00FZPDG1K Side cutters
https://www.amazon.com/gp/product/B00425FUW2 Flux
https://www.amazon.com/gp/product/B008O9VLA2 Solder Wick
https://www.amazon.com/gp/product/B0013HT2QW KimWipes
https://www.amazon.com/gp/product/B001B5JT8C Isopropyl Alcohol
https://www.amazon.com/gp/product/B005CU56KM Acetone spray (use carefully/sparingly)
https://www.amazon.com/gp/product/B004G5T9M0 Jewelers loupe
https://www.amazon.com/gp/product/B019SLLOMY Tweezers
https://www.amazon.com/gp/product/B00P8Z4RPG Hot air station (works well despite Chinesium)
Also, I noticed in Dave's videos he rarely adds flux, just the flux that's built into the multicore solder. I don't know if I'm alone on this one but with flux I always felt the bigger the glob the better the job. Just have to clean it afterwards with the solvent, tissues & brushes.
Edit: Okay that's a much bigger list than I thought, this stuff can get expensive!
The official perler mini tweezers look like they are the same as the electronics anti-static tweezers you see around, but I'm not sure if they are. I have a set of these https://www.amazon.com/PIXNOR-Anti-static-Electronics-Jewelry-making-Laboratory/dp/B019SLLOMY/ref=sr_1_3?ie=UTF8&qid=1473198696&sr=8-3&keywords=esd-15 that work really well - they're meant for electronics work so they are anti-static.
Maybe I went a little overboard, but I bought a set of small pliers from Lowe's and this set of tweezers:
https://www.amazon.com/gp/product/B019SLLOMY/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I'll add a few things on top of the already good advice in the thread:
I don't know how large your hands/fingers are but depending on how complicated the wiring is you may have difficulties threading wire through lugs at times. Tweezers are invaluable for this. I have these.
oh and these for sure. https://www.amazon.com/Precision-Anti-static-Electronics-Jewelry-making-Laboratory/dp/B019SLLOMY/ref=sr_1_3?s=industrial&ie=UTF8&qid=1467918141&sr=1-3&keywords=tweezers+precision
No need to splurge, here is a set of 7 tweezers for 11 bucks.
I have used this set with much success, though I basically only use the angled ones second from the bottom in the product image.
Practical Watch Repairing by Donald de Carle. It's a good start. It goes into detail about some of the tools. You'll need tweezers these are awesome and affordable. You'll need good quality screw drivers, the dollar store kind will damage the screws. Mobious oil is really good. It might look expensive, but a tiny bottle will go a long way. A movement holder will make things easier. And you'll need a magnifier of some kind. I'll send you a picture of my set up tomorrow. I'm poor, so I can't afford swiss tools. Like $100 for a single scewdriver.
> I am looking for tools that I will need for general printing and maintenance
Set of tweezers to remove stringy plastic oozing from extruder, soft wire cutter makes snipping end of filament a breeze, assorted m3-m6 hex nuts and bolts will come in handy. Maybe some combination wrenches
And if you want to run octoprint, a raspberri pi, camera, & power supply.
Not sure what you were looking at, but these should work fine...