Reddit reviews Product 47179

Feuchtraumdose:
https://www.amazon.de/gp/aw/d/B0759G7V4V/ref=mp_s_a_1_4?__mk_de_DE=ÅMÅZÕÑ&qid=1517494214&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=abzweigdose+klein&dpPl=1&dpID=51J2wurYUbL&ref=plSrch

Wagoklemmen:
https://www.amazon.de/gp/aw/d/B005IM1DII/ref=mp_s_a_1_14?__mk_de_DE=ÅMÅZÕÑ&qid=1517494277&sr=8-14&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Wago+klemme

Wenn du Lüsterklemmen verwenden willst (das was da jetzt dran ist, mit der kleinen Schraube), dann brauchst du noch Aderendhülsen und eine entsprechende Zange zum fixieren derselben.

Im Idealfall die Dose da wo das Kabel reingeht noch mit Silikon oder Kleber dicht machen.

Gerade am Handy, deswegen unformatierte Links, sorry.

Edit: Und vergiss nicht dir auch einen Spannungsprüfer zuzulegen falls du sowas noch nicht hast. Du möchtest NICHT an nem eingeschalteten Stromkreis basteln.

Ok i looked into it.

Here you go with the cheapest light thats pretty usable for that price range:

Buy Vero29SE Gen7 COB @ 3500K
Thats about 18€

Then u need the correspondig driver
costs: 16€

Now you need clams and cables:

clams: 9€

cables: 2,5€

Wallplug: 7,50€

Cooler:: 7,50€


Were now at 60€ for a pretty neat 50W single cob light.
you might need another power source for the cooler and some thermal glue or screws and some heatdissipating paste.
Its as easy as to build a PC.


Source: http://ledgardener.com/best-drivers-for-single-cob/

Depends where the break in the wire is. If it's somewhere accessible, there are a million different styles of connector that don't needs solder (like this). If it's under a cable wrap, then yeah, it'll probably best to cut it, strip it, and solder it back together.

When you're replacing the part cooling fan, make sure it has 3 wires. It's the same deal for that fan - the third wire is for telling the printer how fast its spinning. Lots of shady listings show 3 wire images (ripped off the Prusa website), then sell 2 wire fans.