Reddit reviews RAM Pod I Locking Vehicle Mount with 18" Rod and Socket Arm
We found 9 Reddit comments about RAM Pod I Locking Vehicle Mount with 18" Rod and Socket Arm. Here are the top ones, ranked by their Reddit score.
Universal vehicle mount attaches to seat rail without any drilling necessary; 18" aluminum rod can be bent to your ideal positionSingle socket arm compatible with RAM B size ball basesMade of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environmentsBacked by a lifetime warranty
I use X-Grip. Best thing for all the phones I go through:
http://www.amazon.com/gp/product/B00C7B2NV4
They have different ways of mounting it, but i use this:http://www.amazon.com/gp/product/B006ZOW1U2
Mounts to the bolt that holds the front passenger seat down, but there are better options...
I used this stand and have it braced against my center console coming up. They do make completely rigid ones but are much higher $. And here is the back side. And yes. All of the ram mounts I have gotten have been awesome. It’s not going to stay perfectly still without bracing it but works like a charm and I have had no issues. Have the same mount in a separate small car and can take the whole mount off and move it from vehicle to vehicle.
Seems as if Amazon has expanded their RAM inventory; this is the mount I have: http://www.amazon.com/RAM-Mount-Universal-No-Drill-Vehicle/dp/B006ZOW1U2
When I purchased it, it was sold with an iPad cradle and a ball to screw on the back, which I gave to my iPad owning friend. Mounting a device right on the shaft doesn't give a good range of motion, I have a 3-ball adapter (RAM-B-289U) to allow 2 mounts to hang off the one shaft. I paid $32, and I feel it was worth it. Overpriced, but worth it.
If you don't feel that will be necessary, using this $15 2-ball adapter with one socket arm gives you a much larger range of adjustability, without having to bend the aluminum shaft repeatedly.
The ball joints do add a couple inches to the overall length as well, so it should be right around console height if you can get it mostly vertical. If you want something longer you could use something like this: http://www.amazon.com/gp/aw/d/B006ZOW1U2 It would replace the arm and lower bracket, so all you'd need is the AMPS plate and Bracketon clamp mentioned earlier. Another option is to use a double ball connector and use two of the solid arms. Keep in mind that the longer the mount, the more wobbly it will be, so you want to keep it as short as practical.
Diff drop lowers the front diff which makes the CV axle angle better. If you don’t do the drop you will go through CV axles.
I use one of these in each Cruiser to hold my phone. Just bolt it to your seat using the bolt that’s already there. RAM POD I Universal No-Drill(TM) Vehicle Laptop Mount with 18"" Rigid Aluminum Rod & Single Socket Arm https://www.amazon.com/dp/B006ZOW1U2/ref=cm_sw_r_cp_api_F4JXBbW8QAD90
Spare tire mod raises the winch that lifts the spare to allow for more clearance in the rear.
AHC usually takes up space under the hood where the 2nd battery would go. SLEE can help you find something that works, some 100 owners just run 1 really big battery.
Remote starter was on it when we bought it, it’s a drone system that you can activate with your smartphone. Only downside of it is it has a cell phone receiver running all the time which will drain the battery in about a week. If I were buying another system I would not do the cel option.
You have no idea how pissed I was when I found out there is no "off" for mine. Just volume, and if you set it to 0 volume, it still dips the music to talk. Now I use this with this and Waze.
The arm is this -
RAM POD I Universal No-Drill(TM) Vehicle Laptop Mount with 18"" Rigid Aluminum Rod & Single Socket Arm https://www.amazon.com/dp/B006ZOW1U2/ref=cm_sw_r_cp_api_i_lRv4AbCPJVMJ1
You have to cut it to length but any hack saw or sawsall will do it.
The phone grip is this -
Ram Mount Cradle Holder for Universal X-Grip Cellphone/iPhone with 1-Inch Ball - Non-Retail Packaging - Black https://www.amazon.com/dp/B0055PH0XA/ref=cm_sw_r_cp_api_i_vPv4AbNHV7HY1
I despise sticking things to my dash or vents, and hate cheap plastic mounts that rattle.
Check out the RAM mount system. It's a modular kit, you buy only the pieces you need, and it's all very high grade metal parts.
They have rigid but flexible arms that you can bolt under the seat and thread up between the seat and center console, positioning however you like. Check it out:
RAM POD I Universal No-Drill(TM) Vehicle Laptop Mount with 18"" Rigid Aluminum Rod & Single Socket Arm https://www.amazon.com/dp/B006ZOW1U2/ref=cm_sw_r_awd_v2Xbvb141SBHW
https://www.amazon.com/dp/B006ZOW1U2/ref=cm_sw_r_awd_v2Xbvb141SBHW
It says laptop mount, but works for phones too. You just have to buy the phone head, and they make heads for many popular devices or a universal mount.
This is my plan for my mk7, but I don't know if there are any issues with install.
I am a fan of the Ram brand mounts. I would recommend this arm with this holder. You will just need to mount it to your bed or wall above her.