Reddit reviews Rutland 500°RTV High Heat Silicone (Black) 2.7 Oz. Tube
We found 2 Reddit comments about Rutland 500°RTV High Heat Silicone (Black) 2.7 Oz. Tube. Here are the top ones, ranked by their Reddit score.
Rutland High Temperature Silicone is a great solution to your sealant and adhesive needsForms a tough and flexible sealWill adhere to most clean surfaces including: glass, metal, plastics, fiberglass, wood, brick, and stone.Seal fireplace inserts, repair solar panels, apply ceramic tiles to your fireplace surround or heat shielding behind your stove, the uses are endlessRated to withstand up to 500° F (260° C)
Insulation
Controller
High temp silicone
Supply cord
Thermometer
Elements
Insulation adhesive
So, this setup is certainly not perfect and has the potential for uneven heat disbursement but it has worked well for me.
I drilled 3 holes about 3 inches from the bottom of the cabinet for the heating elements and used thin aluminum stock cross members to support them. The holes were sealed with silicon which also helps keep the elements in place.
The entire inside of the cabinet has a layer of cut-to-fit insulation and the seams are taped with high temp flue tape.
I have 2 threaded steel rods running horizontally and offset for hanging parts.
The thermometer is at the top and generally runs a large number of degrees cooler than the parts but I have a good feel for time and tackiness when flashing and layering. I prefer longer cure times at lower temperatures. You can cure this stuff at 150 degrees if you want...it just takes a hell of a lot longer.
The rest of the stuff is just wired up and I'm sure its a huge fire hazard and I have zero experience with this kind of thing but it has worked for me so far without a problem. It's set up in my garage with tons of ventilation and a fire extinguisher close by.
I highly recommend an electronic torque wrench.
The mechanical ones are very inaccurate at the bottom end of range. Head bolts are often at the bottom or below what they can even be set to.
I use this one and it works amazingly well. It can accurately go down to 3ftlb. You can set the desired torque and it has a beep alarm as you approach, reach, and go over the threshold. https://www.amazon.com/gp/product/B004VYUKTC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I also recommend flying with a very basic set of tools. I fly with some hex keys and wrench that fits all the sizes on my paramator. https://www.amazon.com/gp/product/B01F512F74/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Siphon is nice to get fuel out of paramotor. This one works amazingly for me. https://www.amazon.com/gp/product/B07CKW15ZS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Radio chest harness. https://www.amazon.com/gp/product/B007HJKSG8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I added a draw cord to attach my phone to. Phone then tucks into the velcro pocket and is secured by one of these: https://www.amazon.com/gp/product/B01H4E9Z6O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 It's powerful enough to draw in a medium weight phone.
Hook knife: https://superflyinc.com/products/jack-the-ripper-hook-knife
Power floats: https://glidersports.com/shop/powerfloat-2bsure/
Waste flotation: https://www.amazon.com/gp/product/B013RLI9XS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Cut prop tape strips out of this: https://www.amazon.com/Scotchgard-Clear-Paint-Protection-60-inches/dp/B004VG8DS0/ref=sr_1_9?s=automotive&ie=UTF8&qid=1534535837&sr=1-9&keywords=3m+scotchgard
RTV silicon to put on exhaust springs to reduce vibration fatigue: https://www.amazon.com/Rutland-500%C2%B0RTV-High-Silicone-Black/dp/B000H5Y6CQ/ref=sr_1_5?s=home-garden&ie=UTF8&qid=1534352404&sr=1-5&keywords=heat+resistant+silicon+rtv
Motor tachometer: https://www.amazon.com/gp/product/B01GTP6ORC/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Radio: I recommend the FT60 or FT65. The 60 model is tried and true and can also be modded to RX aviation band. FT65 has newer display and is cheaper having been made in China.