Reddit reviews Rutland Products 16906 6-Inch Poly Chimney Cleaning Brush
We found 1 Reddit comments about Rutland Products 16906 6-Inch Poly Chimney Cleaning Brush. Here are the top ones, ranked by their Reddit score.
Chimney cleaning brushDesigned for insulated chimneys, stainless steel or metal stove pipes where manufactures recommend not scratching the flueSturdy plasticAcid resistant1/4-Inch threaded fitting
That looks like an ok system, the brush looks like it’s meant to spin from a drill. Typically i would use something like this.
https://www.amazon.com/Rutland-Products-16906-Chimney-Cleaning/dp/B000FKDMLO
As for the rods you can get button lock or ones that screw together, both work fine. Make sure the rods will fit the brush, if they’re screw- together rods they are typically two sizes, 3/8” and 1/2”, just make sure the brush head is the same size threads. Example of type of rods I use below.
https://www.amazon.com/Midwest-Hearth-Fiberglass-Chimney-18-Foot/dp/B0778XH959/ref=mp_s_a_1_fkmr1_1?ie=UTF8&qid=1540224460&sr=8-1-fkmr1&pi=AC_SX236_SY340_QL65&keywords=chimney+rods+1%2F2%E2%80%9D
As far as cleaning the chimney yourself that’s fine. Many people do it themselves. As long as you have a basic understanding of how things are set up and what is safe (or unsafe) you should be ok. Like if I come to clean your chimney I’m looking everything over to make sure it’s all still connected properly, nothing has decayed or been damaged and everything is installed to code. I look for the type of soot that I’m getting out of it, is it creosote or powdery? As this will tell me about your wood quality and burning habits. So IMO you should have it swept professionally at least every couple of years if you are not sure. But if a sweep has already inspected the chimney and no issues were found you are probably fine to clean your own chimney. Really up to you and how comfortable you are with the venting system.