Reddit reviews Saihisday 8 Pin CDI BOX Unit ECU REV ASW Manco Talon Linhai Bighorn 260CC 300CC ATV UTV
We found 1 Reddit comments about Saihisday 8 Pin CDI BOX Unit ECU REV ASW Manco Talon Linhai Bighorn 260CC 300CC ATV UTV. Here are the top ones, ranked by their Reddit score.
√ Condition: Brand new and high quality, well packed√ Quantity: 1√ Fits Manco Talon Linhai Bighorn Yamaha etc. (see details)√ Ready to use, direct replacement√ 3-month hassle-free return and money back, please buy with confidence
After some testing, come to find out that my fuse had blown. I believe both my stator and ignition coil are bad. I'm getting this "CDI" (TCI) https://www.amazon.com/QUIOSS-Manco-Talon-Linhai-Bighorn/dp/B01MXFGLR5/ref=sr_1_1?keywords=8+Pin+CDI+Yamaha&qid=1566793139&refinements=p_85%3A2470955011&rnid=2470954011&rps=1&s=automotive&sr=1-1 , This stator https://www.amazon.com/gp/product/B01M0M7UIU/ref=crt_ewc_title_dp_2?ie=UTF8&psc=1&smid=A1U821NO27576X , and ignition coil https://www.amazon.com/gp/product/B07M5RNXXC/ref=crt_ewc_title_dp_1?ie=UTF8&psc=1&smid=A16CYTN3L0RHD9 . You can't use just any GY6 ignition coil, it has to be TCI compatible. A common identifier for a TCI compatible ignition coil is that it's grounded by two screws.
​
The wiring diagram is found here https://atvconnection.com/forums/attachments/1-engine-problems/6556d1345695123-linhai-300cc-no-spark-buyang300_wd.jpg . On my bike there is no pink wire, its instead Black/Blue. The pinout to the CDI (TCI) https://images-na.ssl-images-amazon.com/images/I/41p65nxdWsL.jpg. The "Trigger" are the wires coming from the stator which in my case are Blue/Yellow & Black/Red. Not sure which one is plus or minus. I think plus is Black/Red and vice versa (Take that with a grain of salt). Battery (Killswitch) is Blue/Black. Ignition coil is Yellow/Black. Ground is Green. The other 3 pins are not used. The Yellow/Black to the ignition coil needs to be on the left pin (with the screw upright) and the Killswitch/Battery wire to the right.
If you don't have a compatible harness you can crimp on these 2.8mm spade connectors https://www.amazon.com/s?k=2.8+spade+connectors&i=automotive&ref=nb_sb_noss_1 . Maybe after you confirm that everything works you can hot glue them in place.
I hope this helps someone.