Reddit reviews Scotch #35 Electrical Tape, 10828-DL-2W, 0.75 in x 66 ft x 7 mil, White
We found 7 Reddit comments about Scotch #35 Electrical Tape, 10828-DL-2W, 0.75 in x 66 ft x 7 mil, White. Here are the top ones, ranked by their Reddit score.
Offers the mechanical and electrical protection you need with its pressure-sensitive, rubber-resin adhesive and PVC backingFlame-retardant tape that also resists UV rays, abrasion, moisture, alkalis, solvents and many types of acidsWorks for all your identification needs: color-coding motor leads and pipe systems, identifying phases and marking safety areasEach roll measures 3/4 in x 66 ft. x 7 milMade from durable, white-colored PVCPremium grade, 7 mil electrical tapeStretches to conform to virtually any shape requiring color-coded insulationAbrasion and weather resistantUL listed
white scotch electrical tape
don't bother with "stick tape", its just electrical tape but more expensive
white electrical tape
This is the perfect sailor gift for him:
Leatherman with one handed knife on the outside. I currently use the Sidekick
OR
Buck Redpoint Knife. This is the best knife I have found for sailing (if you don't want to carry a leatherman)
AND
Nylon belt sheath for Leatherman/Knife
AND
Double D ring belt, in nylon. This is the type of belt sailors wear. Pick whatever colors/pattern you like.
You can get this for $60 or so, and he will love it and use it all the time.
For a little added treat, get him some white electrical tape. 3M brand only, type 35. White only.
I had a shelving unit that had built in fluorescent tubes. Now, granted it is an accent shelf, and each shelf was approximately 20" x 18". The fluorescent tubes were on the 20" sides, and there was no lighting on the 18" sides. I used Hue Gen 2 light strips all the way around on all three shelves, and the light (without all the CRI calculations) passed the "wife test". No discernible difference at full power detected. (SCORE!).
I also didn't care for the dots of each LED, so I put the Hue lightstrips into these:
https://www.amazon.com/gp/product/B01NCS0WE8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
These are super easy to cut with a handsaw, easy to install, and nicely diffuse the LED light and protect the strips.
Where I needed a non-lit extension (such as between each shelf), I used these:
https://www.amazon.com/gp/product/B01M7XDZ5V/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
And finally whenever there was a junction, I used white electrical tape to make sure the two strips stayed affixed. Just a small bit to wrap around the joint.
https://www.amazon.com/gp/product/B000FP8HSM/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
http://www.amazon.com/3M-Electrical-75-Inch-66-Foot-007-Inch/dp/B000FP8HSM/ref=pd_sim_hi_1?ie=UTF8&refRID=1ET8NTXDF31WFTEHP445
White electrical tape
Have you thought about putting up some white electrical tape to cover up the loose wire?