Reddit reviews SoundOriginal 24V DC Brushless Blower Cooling Fan 50x50x15mm,for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (24v Dual Ball Bearing 2pack)
We found 5 Reddit comments about SoundOriginal 24V DC Brushless Blower Cooling Fan 50x50x15mm,for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (24v Dual Ball Bearing 2pack). Here are the top ones, ranked by their Reddit score.
Cooling Blower Fans; DC 24V 0.15A 50mmx15mm Widely used in humidifier, aromatherapy and other small appliances series; small heat radiating communication equipment; military equipment; intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling; pc cpu server cooling dissipation and so on---Repair Replacement (2Pack)Bearing Type: Dual Ball Bearing, Speed: 5800 RPM, Air Flow : 3.6 CFM bearing made in Japan. Guaranteed to continuously run 40,000 hours under normal temperature.Total Size : 5 x 5 x 1.5cm /2" x 2" x 0.6 " (L*D*H); Outlet Size : 2 x1.5cm/0.8" x 0.6"(L*W) Cable Length : 25cm/9.8"; Mounting Spacing : 5.8cm/2.3";Weight : 26gThis fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.Brushless Fan,DC Blower Fan,Brushless DC Blower Fan,50x50x15mm Fans
I bought a two pack of 24V ball bearing fans from amazon that do well. The blower that th3d carries also looks nice, more expensive but higher cfm.
With either one you'll probably want to flash a new firmware that's tuned for a 5015 blower. There are configuration options which will reduce the whine of the blower and allow it to start spinning at lower speeds.
https://www.thingiverse.com/thing:3563135
​
I found a vent ring that accepts a 5015. I highly, highly suggest getting a 5015 blower.
​
Here's the ones I got. You also get 2 of them so you can go straight to dual blowers as well if you would like that.
It's a super worthy upgrade. Easy to install too, just snip the 4010 wires and splice the new fan on. For 2 blowers you wire them both to the same line in parallel. Or if you want to do it the pro way, use dupont connectors and a crimper.
​
I used these nifty things to connect them. Super convienient.
Thought I would report back in case anyone else is looking for info. The new fans work great and as expected. I'm not sure what was up with the first ones, or amazon may have accidentally sent me the "queit" version which is supposed to run at a lower rpm.
Here is a link to the fans that work well if anyone comes across this.
Thanks again for putting in the effort to help!
so something like these?
https://www.amazon.com/SoundOriginal-50x50x15mm-Humidifier-Aromatherapy-Replacement/dp/B07DQ7F1T7/ref=pd_cp_147_3?pd_rd_w=GyX7N&pf_rd_p=ef4dc990-a9ca-4945-ae0b-f8d549198ed6&pf_rd_r=SXXT0H0PKXJGREFY3G75&pd_rd_r=87555eab-7344-11e9-a30c-45137eaa8a8d&pd_rd_wg=t1T85&pd_rd_i=B07DQ7F1T7&psc=1&refRID=SXXT0H0PKXJGREFY3G75
​
edit: just realized the ones i originally posted are ball bearing based, derp. these other ones are double the cost and 1/2 the qty. i must be missing something as far as qualtiy or such
I've seen these available with ball bearings, which should last longer:
https://smile.amazon.com/SoundOriginal-50x50x15mm-Humidifier-Aromatherapy-Replacement/dp/B07DQ7F1T7
​
I've no experience with this brand so I have no idea how well they work.