Reddit reviews Supermicro SuperServer 5018D-FN8T Xeon D Mini 1U Rackmount,10GbE LAN, SFP+, IPMI
We found 7 Reddit comments about Supermicro SuperServer 5018D-FN8T Xeon D Mini 1U Rackmount,10GbE LAN, SFP+, IPMI. Here are the top ones, ranked by their Reddit score.
Intel Xeon D-1518 2.2 GHz Quad Core Processor; Aspeed AST2400 BMCSupports 4x 288-pin DDR4 DIMM; Supports up to 128GB DDR4 ECC RDIMM, Supports up to 64GB DDR4 ECC/non-ECC UDIMM, DIMM Sizes: 32GB, 16GB, 8GB, 4GBSupports 4x SATA3 6Gb/s drives, 1x M.2 (2242/2280/22110, PCI or SATA MUX), 1x mSATA (SATA MUX), and SATA DOM2x 10Gb SFP+ Ports (Intel D-1500 SoC), 4x 1GbE RJ45 (Intel i350-AM2), 2x 1GbE RJ45 (Intel I210), 1x IPMI RJ45 (Realtek RTL8211F PHY)Case Dimensions: 437mm x 249mm x 43mm, 17.2" x 9.8" x 1.7" (in inches)
I’ll let you know when I get home.
Edit: I’ll do you one better, here’s the exact link to what we bought. Supermicro SuperServer 5018D-FN8T Xeon D Mini 1U Rackmount,10GbE LAN, SFP+, IPMI https://www.amazon.com/dp/B01LXUATHB/ref=cm_sw_r_cp_api_SyK0Ab0Z5ZB4B
I use these for lower end hyper v hosts and set up them up as replicas... Memory is still kind of expensive for them though:
Supermicro SuperServer 5018D-FN8T Xeon D Mini 1U Rackmount,10GbE LAN, SFP+, IPMI
​
https://www.amazon.com/gp/product/B01LXUATHB/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I've had my eye on this but honestly the pfSense XG-1541 model might be a better idea simply because of support.
Edit: Didn't notice the comment about top of rack switches. I've been using mostly Huawei and Extreme Networks for a while now.
One option to consider, if you want to do any kind of 10Gbe, the SuperMicro 5018D-FN8T can be a very well-priced option - it's current generation, very efficient, and really well-priced for what it is. It's a little bit pricier than recycled-enterprise gear, but not much.. and it's basically top of the line for a little low power server. https://www.amazon.com/Supermicro-SuperServer-5018D-FN8T-Rackmount-10GbE/dp/B01LXUATHB
The server you show is an 8-core.
The 4-core one would be : https://www.amazon.com/Supermicro-SuperServer-5018D-FN8T-Rackmount-10GbE/dp/B01LXUATHB/ref=sr_1_1
That's an $800 chassis (without the hot-swap drives.)
The UAS has a $75 boot SSD, two $100 data drives, and $200 for 32GB RAM ($300 for the ECC).
So I could build something like this for $1200 but I would not have the hot-swap drive bays. I would have more LAN ports, and fewer USB ports.
They sell the same system in a 1U case for a bit more:
https://www.amazon.com/dp/B01LXUATHB/
Along with Pfsense & VyOS, you may want to check out Untanagle NG. There are a lot of virtual router and firewall options out there right now. I assume you would need something with SFP+ to accept the 5Gbps ISP connection. That's the hard part since most routers & firewalls that support speeds greater than 1Gbps are pricey. A combo like this may work for you. Since the Microtik router has two SFP+ ports, you can use one for the ISP link and one for a 10G link to the server running Pfsense or whatever. And then use the remaining router RJ-45 links to span out to your switches.
https://www.amazon.com/Mikrotik-CCR1036-8G-2S-Router-Gigabit-touchscreen/dp/B00HWXBHLO
https://www.amazon.com/Supermicro-SuperServer-5018D-FN8T-Rackmount-10GbE/dp/B01LXUATHB