Reddit reviews Ubiquiti UniFi HD 802.11ac Wave 2 Enterprise Wi-Fi Access Point (UAP-AC-HD-US)
We found 5 Reddit comments about Ubiquiti UniFi HD 802.11ac Wave 2 Enterprise Wi-Fi Access Point (UAP-AC-HD-US). Here are the top ones, ranked by their Reddit score.
Connectivity technology: Ethernet
Wi-Fi isn't capable of gigabit yet. For one thing, it has roughly a 50% overhead so the best you'll get is about half the design speed. It also depends heavily on the Wi-Fi hardware of the device you're using. Best case scenario is if the device and AP both support four streams, that gives you a design speed of 1733 mbps. Three streams, 1300 mbps. Two streams, 867 mbps. One stream, 433 mbps. And you need to halve these numbers to account for overhead, giving you real-world speeds of 867, 650, 433, and 216 mbps respectively.
So, you need to figure out how many streams your devices can use, and get an AP with the same number of streams as the device with the most streams. Having an AP with more streams than your devices can use is pointless. So, once you know what you can actually use, get one of these:
Four-stream AP
Three-stream AP
Two-stream AP
Note that these are APs only, not routers, so you'll also need a router. This one will be the ideal choice to go with any of those APs, as you manage them in the same software. You'll also need a gigabit switch (any will do) if you plan on connecting anything more than just a single AP to the router.
In case you're confused, all you need to know is that a "wireless router" is actually three devices combined into one box: router, switch, and AP. The switch is what gives you multiple LAN ports, the AP is what gives you Wi-Fi. What I'm recommending is to get each of these three devices separately.
And last but not least: To get full gigabit speed on any device, you need to connect it with Ethernet.
Drop the consumer stuff and get some real APs.
https://www.amazon.com/gp/aw/d/B01N15FSAG/ref=mp_s_a_1_fkmr0_1?ie=UTF8&qid=1526507298&sr=8-1-fkmr0&pi=AC_SX236_SY340_QL65&keywords=ubiquiti+uap+hd+3+pack
Ubiquiti APs are only access points. This means they only broadcast a wireless signal. Your router (a G1100 I presume) will still do all the routing/dhcp/port forwarding/firewall/etc, but the UniFi handles the wireless broadcast.
I own a Unifi 802.11ac PRO, which I plug into my Ubiquiti 8 port switch, which then gets plugged into my Edgerouter-Lite. However, you are correct, you can simply plug it into a LAN port with any router you have, set up your UniFi access point, then turn off wireless broadcast at your G1100.
If you want access to the advanced control panel, then you have to install the UniFi control software on your PC (or raspberry pi, or basically any device on your network) and set up from there. If you don't have a whole ubiquiti setup for the entire chain, then getting the phone app and setting up basic functionality (AP names/passwords/etc) works just fine as well.
It's really easy, and honestly will just plug and play with your existing router. You'll just have to head in and set up your AP names and network passwords.
I speed test at my max (100/100) with an AC Pro, and generally have no problems pulling files from my local NAS at 400-500mbps over wireless.
Lots of people have been having great success with the UniFi-AC-HD which is a wave2 access point. It's very expensive, but if you have a wave2 card in your PCIe 1x slot, you can realistically pull somewhere in the 600-800mbps range over wireless with it.
So, by all rights I would heavily recommend getting a professional to do this for you, they will be available to help with any issues that crop up down the line. That saaaaiiidddd... you could also do this.
Get:
This will run you shy of $900 and will take care of the network forever... until something breaks. Then whatever poor SOB has to take over for you has to figure out what's been done and how to fix it. If you can get that approved, come back for help on how to put it together. It will take some trial and error to figure out if you need additional APs depending on the space, but these are beefy units.
I have never seen a piece of Ubiquiti gear die, aside from what I've killed myself. As long as people don't fuck with it, it should work fine for years.
---
As far as data storage goes, a proper Synology NAS would be my recommendation, but it depends on how much storage space you need. So, how much do you need? If you need less than 12TB, you can get away with a 2 bay device like the DS218 ($250 - https://www.amazon.com/Synology-bay-DiskStation-DS218-Diskless/dp/B077PJX8TH). The amount of storage will determine the cost of the drives, 4TB would be ~$300, 12TB would be ~$900.
---
Last item would be a battery backup. This is not optional. It will keep electricity hijinks from kiling your data or equipment. Never plug anything else into it and leave it alone once set up. https://www.amazon.com/APC-Compact-Protector-Back-UPS-BX1500M
https://www.amazon.com/Ubiquiti-Unifi-Security-Gateway-USG/dp/B00LV8YZLK/ref=sr_1_2?ie=UTF8&qid=1511814229&sr=8-2&keywords=Unifi+Security+Gateway
https://www.amazon.com/Actiontec-Bonded-Ethernet-Adapter-ECB6200S02/dp/B013J7OBUU/ref=sr_1_2?s=electronics&ie=UTF8&qid=1511814273&sr=1-2&keywords=moca+bridge
https://www.amazon.com/Ubiquiti-UAP-AC-HD-Unifi-Access-Point/dp/B01N15FSAG/ref=sr_1_1?s=electronics&ie=UTF8&qid=1511814368&sr=1-1&keywords=unifi+ac+hd
I like the sound of the USG one. Is this essentially all I need to get it set up? The MoCA 2.0 Bridge, USG, and the UniFi AC HD. And the software which I'm assuming is a free download. What is a switch and do I need one of those as well? And do the Verizon agents that come and set up everything work with these as well? I would assume not..