Reddit reviews [Updated Version] 3-Socket Cigarette Lighter Splitter,120W 12V/24V Car Power DC Outlet Adapter with 6.8A 4 USB Charging Ports Car Charger
We found 2 Reddit comments about [Updated Version] 3-Socket Cigarette Lighter Splitter,120W 12V/24V Car Power DC Outlet Adapter with 6.8A 4 USB Charging Ports Car Charger. Here are the top ones, ranked by their Reddit score.
đăSafety UpgradedăBuilt in smart temperature detect switch for better overload protection and overheat protection. When working power exceeds 120W or temperature is higher than 170â, the car charger adapter will automatically turn offđăOne Charger for AllăThe Multiport Car Charger Splitter has 4-Port USB charging ports with 6.8A and 3 cigarette lighter sockets provide a total power up to 120W. Enough for simultaneous use of a variety of portable appliances in your 12V/24V vehiclesđăPower Switch & VolmeterăDesigned with on/off power button for energy-saving and devices protection. It helps monitor your car battery, when the voltage is under 12V, warning with flashing number on the displayđăHigh Safety StandardsăBuilt-in PPTC auto-recovery 7amps fuse and protective circuits prevent the product and your devices from overloading or short-circuiting, uninterrupting performance of navigation and media streaming. Car power splitter rubber grip for stable charging connect. Certified by RoHS, CE & FCCđăAdvantage Designă3.3FT cable is convenience for your family and friends in backseat. No worry about the charging. 7 in 1 design makes your car more neater.
So these links may or may not be available in India but here goes:
For the head unit you can use any single or double din head unit you want but youâll need something like this https://www.walmart.com/ip/Fits-Hyundai-Elantra-2011-2013-Multi-DIN-Harness-Radio-Install-Dash-Kit/139857463?wmlspartner=wlpa&selectedSellerId=8959&adid=22222222228073528031&wl0=&wl1=g&wl2=m&wl3=186802530458&wl4=pla-291268499731&wl5=9011246&wl6=&wl7=&wl8=&wl9=pla&wl10=115786984&wl11=online&wl12=139857463&veh=sem&gclid=EAIaIQobChMIgY32wtqp5AIViYbACh2cWAI6EAQYASABEgLEVPD_BwE
And for the 12v extension mine is kind of like this
[Updated Version] 3-Socket Cigarette Lighter Splitter,120W 12V/24V Car Power DC Outlet Adapter with 6.8A 4 USB Charging Ports Car Charger https://www.amazon.com/dp/B0794SC177/ref=cm_sw_r_cp_api_i_p.jADb4C6YWSQ
As far as identifying misfires, when you are going at a steady speed, youâll notice your rpms will drop slightly. That is what happened when the coil packs went out. If the crank sensor goes out it will usually throw a check engine code, but youâll also know by the car being hard to start (like try to start, stop, try again, try again and it starts) but itâs turning over fast, not slow like if it had a dead battery. The crank sensor is on the very front of the engine.âif you are under the car, run your hand up from the oil pan to the vertical face of the front of the engine and itâs a little plastic square there. I just pointed those out because in almost 100k miles between the cars, those are the only two unusual maintenance items that have come up.
No, it doesn't matter at all, you just need a 12 volt power source like the cigarette lighter receptacle. There are also a lot of car modification shops if you want someone to do the installation for you.
If you want to just get one of the inexpensive backup cameras from Amazon you should check out some video tutorials to get started. Some people power the camera off of the reverse light (you know, the white lights on the back of cars when they go in reverse). That means that the camera stays off until you go into reverse. Personally I just leave my camera on, so I power everything off of my Cigarette Lighter Receptacle. Here are the parts I used:
A camera and monitor.
A cigarette lighter receptacle adapter.
A terminal strip. (This connects the cigarette receptacle to the camera and monitor).
Extension cable to connect your camera to your terminal strip.
Wire crimp connectors to connect the camera to your extension cable.
Optionally, but recommended: A cigarette receptacle splitter so you have extra power ports.
Sorry if my way of doing it is a little hacky, but it works. Let me know if you have any questions.