Reddit reviews VIOFO HK3 Acc 3-Wire Hardwire Cable 4 Meters for Parking Mode for A129 / A119 V3 Dash Cam
We found 7 Reddit comments about VIOFO HK3 Acc 3-Wire Hardwire Cable 4 Meters for Parking Mode for A129 / A119 V3 Dash Cam. Here are the top ones, ranked by their Reddit score.
Adjustable voltage low voltage protection function, it will cut power to your dash camera when detect the vehicle battery voltage is below the set number. It has four voltage options 11.8V, 12V, 12,2V, 12.4VWith ACC detection feature, dash cam will switch to parking mode automatically if the vehicle engine off, and switch back to normal recording after vehicle engine on. Please be sure the cable is connected to the camera directly, not through the GPS mount. Note: GPS will also work if the cable is connected to the camera body.Support three parking recording modes, auto event detection, time lapse and low bitrate recordingThe red battery cable should be connected to constant power. The ACC yellow cable should be connected to ignition. The Ground cable should be connected to vehicle body.Also fit for other dash cams, but ACC function will not be available.
> If so, would this basically kill your car battery?
Most hardwire kits have a Low Voltage Cut Off Feature.
12.4v = Normal use
11.8v->12.2v = Deep cycling - 1/2s the expected battery life
11.6v = Dead battery.
---
It also matters what type of fuse you tap into:
2 Wire hardwire kit: You have a choice to make (Always on)= Parking mode, (Ignition only) = No Parking mode.
Generally 2 wire systems detect if the vehicle is on/off via G sensor/Motion sensor inactivity.
3 Wire Hardwire kit:
3 Wire hardwire kits can be G sensor/Motion sensor detection, but generally they detect via the Ignition key position/wires to fuse box.
---
Even if you do not plan on using parking mode, it is bad form to purchase hardwire kits with improperly setup low voltage cut off features.
This is what I'm getting to hardwire it in, it's Viofo's own kit:
https://www.amazon.com/gp/product/B07KZGM9LS/ref=ox_sc_act_title_1?smid=APVAUZZOJUWDA&psc=1
I don't know anything about the polarizing filter though, but I'm buy curious about it.
Mine will do the same.
This is the hardwire kit: https://www.amazon.com/Viofo-3-Wire-Hardwire-A129-Camera/dp/B07KZGM9LS
Do you have fuse taps already? I didn't see them in your cart? This one is the same hardwire kit you have in your cart but has options for different size fuse taps. Alternatively, this one has the cam plus hardwire kit with fuse taps for the same price with additional trim removal tools and a simple fuse checker to see which fuses are live when the car is off.
Would you advise this setup then?
[A129](【2019 Latest Version】VIOFO A119 V3 Dash Cam 2560x1600P Quad HD+ IMX355 5MP Sensor Car Camera 140-Degree Wide Angle GPS Included, Buffered Parking Mode, Motion Detection, G-Sensor, Time Lapse, WDR https://www.amazon.co.uk/dp/B07RXQLV5C/ref=cm_sw_r_cp_apa_i_e9tCDbNMJQNTX) and [VIOFO 3 wire kit](VIOFO A129 Dash Cam 3 Wire ACC HK3 Hardwire Kit For Parking Mode https://www.amazon.co.uk/dp/B07KZGM9LS/ref=cm_sw_r_cp_apa_i_EguCDbWMP80EC)?
Also just considering the Blackvue DR590W-2CH or Blackvue DR750S-2CH with the BlackVue Power Magic Pro.
Is the 750 worth an extra £60 over the 590?
And how does the rear camera connect? Would I need a 2nd hardwire kit for parking mode?
Thank you!
Is this the correct hardware kit?
https://www.amazon.com/Viofo-3-Wire-Hardwire-A129-Camera/dp/B07KZGM9LS/ref=sr_1_2?crid=QK7O5MVGQXYV&keywords=viofo+3+wire+acc+hardwire+kit&qid=1569346851&sprefix=Viofo+3-wire+hardwire+kit%2Caps%2C227&sr=8-2
Is this the correct tap-a-fuse kit?
https://www.amazon.com/Uriveusa-Circuit-Adapter-Holder-Upgraded/dp/B01LFXA5YQ/ref=sr_1_1?keywords=tap-a-fuse+wire&qid=1569346818&sr=8-1
The easiest way is to get the A119 and the [associated hardwire kit](https://www.amazon.com/Viofo-3-Wire-Hardwire-A129-Camera/dp/B07KZGM9LS/ref=asc_df_B07KZGM9LS/$tag= rdtdshcmsb-20) which will enable parking mode without fully discharging your battery.