Reddit reviews VSDISPLAY HDMI Audio LCD Controller Board Fit to Arcade1UP DIY Parts 17 inch M170ETN01.1 WYD170SKD 01 LCD Monitor
We found 2 Reddit comments about VSDISPLAY HDMI Audio LCD Controller Board Fit to Arcade1UP DIY Parts 17 inch M170ETN01.1 WYD170SKD 01 LCD Monitor. Here are the top ones, ranked by their Reddit score.
Work with Arcade1UP screen M170ETN01 1 WYD170SKD 01 ,for DIY Arcade1UP work with Raspberry Pi.(Help to confirm your machine screen name is M170ETN01 1 or WYD170SKD 01 first, which mark at the back side of the screen label,need to open the rear case to check) (If the screen model name is DV170YGM-N10 or DV170YGZ-N10, help to get "VSDISPLAY HDMI Audio LCD Controller Board Fit to New Arcade1UP 17 inch 4:3 1280X960 LCD DV170YGM-N10/DV170YGZ-N10, to DIY New Arcade1UP Work with Raspeberry Pi")Compatible work with Raspberry Pi. Controller board model type: M.NT68676. Compatible speaker recommend use: VSDISPLAY Speaker 8ohm 2W 70mmx33mmx15mm 4Pin Cable for LCD Controller Board M.NT68676Board power supply adapter recommond use: which output 12Vdc more than 2A spec.adapter (Help to notice , must 12V DC , if other voltage, may damage the board or can not power on the board. Electric current suggest over 2A ,and if the current too low , it can not light on the LCD). Power adapter cable connector: 5.5mmx2.1mmVideo Input: HDMI DVI VGA ,Audio Input: HDMI ,Audio Output: Speaker 4pin Connector. ,Board Size:125mm x 58mm x 17mm.Packing list : 1× HDMI VGA DVI LCD Controller Board M.NT68676, 1× Screw And Nut For GND Connection, 1× Keyboard With Cable(Help to notice there is no power adapter and speaker and board case in the packing list) If you need , you can get them from VSDISPLAY store. Any question, please feel free to contact with us.
I have a concern about the HDMI monitor converter they are offering. There are more than one converter board out there, and they are designed to match different monitors. Arcade1Up cabinets do not all have the same display. Very similar, but there are a few different ones. As I understand it, if you get the wrong hdmi converter board, it can damage the display. Unless they know something I don’t, I don’t understand how they can sell just one converter for all Arcade1up models.
The “right” thing to do is look at the back of your display and find the model number. It’s a pretty big sticker. My centipede cabinet has M170ETN01 1. Then, search Amazon for “hdmi controller <model number>. That’s how I found this. Notice how it has the display model number in the product description:
https://www.amazon.com/VSDISPLAY-Controller-M170ETN01-1-WYD170SKD-Monitor/dp/B07MRJG3HT/ref=sr_1_2?keywords=HDMI+controller+M170etn01&amp;qid=1567351373&amp;s=gateway&amp;sr=8-2
Just purchased and used both of these for SF 1Up mod with M170ETN01.1 monitor. . Joystick and encoders worked great with PI or Windows. Easy swap out of the control panel.
Avsiri 2 Player LED Arcade DIY Parts 2X USB Encoder + 2X Ellipse Oval Style Joystick + 20x LED Arcade Buttons for PC MAME Raspberry Pi Windows (Mixed https://www.amazon.com/dp/B07M5WSL24/ref=cm_sw_r_cp_apip_nyzxL5f4guFdv
VSDISPLAY HDMI Audio LCD Controller Board Fit to Arcade DIY Parts 17" M170ETN01.1 WYD170SKD 01 LCD Monitor https://www.amazon.com/dp/B07MRJG3HT/ref=cm_sw_r_cp_apip_cRmsDIBO7hBme