Reddit reviews Vulcan 961641or Bi Metal Hole Saw, 2-3/8"
We found 4 Reddit comments about Vulcan 961641or Bi Metal Hole Saw, 2-3/8". Here are the top ones, ranked by their Reddit score.
"VULCAN" BI METAL HOLE SAWHeavy duty bi-metal drill bit.1 piece with pilot drill bit and mandrel.1-3/4" maximum depth of cut.High speed steel teeth.
It's 2 3/8" (2.375"). If you cut 2.25" it won't fit.
I just cut the same cooler as OP tonight (same color and everything!), I used this hole saw and it fits perfect.
Yes, that's an insert ring. It'll basically cover the rough edges and kinda hide the hole to give a cleaner look overall. This is a hole saw that will fit that exact ring - https://www.amazon.com/Vulcan-961641or-Metal-Hole-Saw/dp/B000X2ILXS/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1486606762&sr=1-1-catcorr&keywords=2+3%2F8+hole+saw.
Basically, mark out where you want to make the hole, then make a dent directly in the center of where you want it to be to keep the hole saw from slipping while the drill threads cut in. Then just attach the hole saw to any drill, put moderate pressure and medium speed at first, and let the drill do the rest. Just make sure you stay as well directly on top of it as you can.
I have that same monitor! LG ultrawide.
I would wall mount the monitor to the recessed wall behind the desk because that base eats up a lot of desk space. It's not the largest desk, and about 1/3 of it is behind the monitor and dead space.
Cable clean up will help also. Maybe [one of these](velcro cable ties) and maybe drill a grommt on the desktop if possible with one of these and these.
A grommet might allow you to push the PC flush against the back wall, with the back end pointing towards the grommet, to maximize existing cables at their length.
For the DIY-ers out there, get you one of these and one of these and make a sous vide cooler for your Anova.