Reddit reviews Wolverine PST085 Inner/Outer Reamer

There's not one that I know of that will do what this one will do with copper, but for simple chamfering, these work very well.

What size/type of tubing are you using?

I use 12mm bitspower acrylic or 12mm PETG barrow tubing.

My favorite set of tools are:

https://www.amazon.com/3Pcs-Hardline-Mandrel-45-90-180-Rigid/dp/B01IDVQC8Q

https://www.amazon.com/Wagner-Digital-Heat-HT3500-503040/dp/B00BV14VMA

https://www.amazon.com/Wolverine-PST085-Inner-Outer-Reamer/dp/B0002YVLHA

For the barrow PETG:

For cutting: https://www.amazon.com/Apollo-Valves-69PTKC001-Plastic-Tubing/dp/B0054YDY0A or similar

The insert: https://www.amazon.com/Barrow-Silicone-Bending-Tubing-Black/dp/B01M9CTQ1S for when I buy barrow tubing (it's 8mm ID, 12mm OD)

For the bitspower acrylic:

For cutting: https://www.amazon.com/Premium-Mini-Hack-Blade-Angles/dp/B01COE3YZ2 or similar

Edit: Found the insert: http://www.performance-pcs.com/bitspower-silicon-bending-cord-10mm-clear-1m.html

Cleaning up and shaving down to size (this thing is amazing): https://www.primochill.com/products/primochill-rfb-rigid-tubing-finishing-bit

Buy the insert made by the company that makes the tubing for best compatibility imo.

Also I use a belt sander.

Edit: Also I use Mayhems dyes with either white pastel or their X1 clear. Both should be safe with PETG or Acrylic.

That deburring tool isn't very good for deburring.

If you're doing petg, you'll be very unhappy with its outer edge deburring performance.

This is the same tool that is much better made: https://www.amazon.com/dp/B0002YVLHA/
It still will NOT do external edge deburring well on petg. But it is made better :)


I recommend a circular pipe cutter over a hacksaw. They will leave much cleaner cuts.

Capri Tools MiniKlinge Mini Tube Cutter, Klinge Close Quarters with 1/8" to 1-1/8" OD, Blue https://www.amazon.com/dp/B01DCHA3RC/