Reddit reviews YaeCCC Climbing Harness for Fire Rescue High Altitude School Assignment Caving Rock Climbing Rappelling Equipment Body Guard Protect (Full Body)
We found 2 Reddit comments about YaeCCC Climbing Harness for Fire Rescue High Altitude School Assignment Caving Rock Climbing Rappelling Equipment Body Guard Protect (Full Body). Here are the top ones, ranked by their Reddit score.
CE Certified, Safety first! Shoulder straps for seat harness;Designed for taking the load from the waistbelt and redistributing it to the shoulders for improved comfortStraps connect to the ventral attachment point of the harness and to the two slots at the rear of the waistbeltAdjustable, one size fit most Material;High strength polyester.Weight limited:800KG.Breaking strength:22KNProfessional Rock Tree Climbing Fall Protection Safety Harness Carving EquipIt can be used to rock climbing,floor escape,rappelling; Material: High strength polyester, aluminum alloy ;Waist Perimeter: approx. 80 - 140cm / 31.5- 55.1 inch Leg Perimeter: approx. 60- 75cm / 23.6 - 29.5 inch
This is the one I got.
https://www.amazon.com/YaeCCC-Climbing-Assignment-Rappelling-Equipment/dp/B073LSTSW3/ref=sr_1_10?keywords=climbing+harness&qid=1555885326&s=gateway&sr=8-10
Works great.
Hi, new to climbing and looking for advise. There is a new rail to trail being built near my house and I somehow became caretaker to the trail. It has been basically 70 years of neglect and was built on a granite hill with a cliff on one side and a berm on the other. The hill is composed of fractured granite with a lot of invasive species growing between the rocks and fracturing it. I would like to be able to get the invasive species out but it is impossible on the cliff side. I plan on rappelling myself on the top side and tie the rope to the trees and be able to slowly walk down the edge and pull out or cut any vegetation.
What gear would I need? I was looking at https://smile.amazon.com/gp/product/B018RLPEY0/ref=ox_sc_saved_title_9?smid=A5THPGRP6FZBY&psc=1 but this seems to be only when you actually fall and not provide support or anchoring while I work or is this more what I need https://smile.amazon.com/gp/product/B073LSTSW3/ref=ox_sc_saved_title_10?smid=A2760MNFACRLA8&psc=1 ? I know I am supposed to get dynamic rope but its only 20 feet down max, would static rope be okay?
I would like to be able to be supported behind my back or on the side to be able to make cuts with I am going to use a one handed reciprocating saw or loppers.
The cliff is 15-20 feet tall max with it being a full 90 but above it is a dirt hill with trees greater than 12 inches diameter with a steep but with ropes manageable 60-70 degrees. You can walk around the cliff to reach the top as there is a trail up there. The closer you get to the cliff the more steep it gets.
Am I doing this wrong? Is this too dangerous? Thanks in advance.