(Part 2) Best bathtub & shower systems according to redditors
We found 147 Reddit comments discussing the best bathtub & shower systems. We ranked the 72 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.
https://www.amazon.com/SR-SUN-RISE-SRSH-F5043-Bathroom/dp/B014SWZG5O/ This is a $200 version.
So... they're no longer allowed to sell you shower heads that put out more than 2.5 GPM at 80psi. Combination shower heads now must limit how many nozzles are working at once to avoid exceeding this limit.
But you're free to buy... two shower heads. Or four. Or eleventy-one. You just need to set up the plumbing for them. You're also free to, per Internet commentary, 'drill out the nozzle apertures'. Beyond that, it's just a matter of plumbing it together and having the ability to supply that much hot water. That means large-diameter pipes & valves, and as far as supply, you could either rig up a very large insulated storage tank, or use something like a sizable condensing-boiler furnace with a heat exchanger to function as an on-demand water heater. 2.5GPM eats up about 22KW or 75,000BTU/H. If you're using 25 showerheads, you're going to need something like this - https://www.acwholesalers.com/Weil-McLain-383600017/p49931.html , and I don't even know what you'd use for a purely electric on-demand system. A commercial three-phase 480V electric service, to start with.
You don't even need a fancy computer control thing for most of what you want (everything but the beeping). Thermostatic mixing valves are mechanical valves that automatically shift to maintain a stable temperature. You set a temperature on the dial, and it adjusts the hot/cold valves as needed to achieve that temperature. So, if your incoming water changes temperature over time, it'll adjust for more/less hot water incoming to keep the output (reasonably) steady at the requested temperature.
For some reason, they're not common in the US, but they are in much of the rest of the world.
https://www.amazon.com/dp/B01N12GBRO
The left side controls the pressure, and the right side sets the desired temperature. The red button on the right is a safety thing where it won't allow you to twist all the way to the dangerously hot temperatures unless you hold that in while twisting.
Agree with this. Delta in particular makes good products at better prices than moen. Similar to what the OP wants Delta Faucet T14259-BL Trinsic Monitor 14 Series Shower Trim, Matte Black, https://www.amazon.com/dp/B06XHHR98K/ref=cm_sw_r_cp_apa_i_x0hwDb2YT9A05
yeah, but unless its a new build you would need to take apart your shower tiles
Edit: its $345
https://www.amazon.com/Moen-Connected-Bathroom-Controller-TS3302TB/dp/B01MY07CZG
I’ve installed grohe valves similar to this. Sorry can’t tell from this picture.
Grohe 26128000 Euphoria Shower System 180 with Thermostat for Wall Mounting, Chrome https://www.amazon.com/dp/B00K7RS0O4/ref=cm_sw_r_cp_api_JhF-zbWK748V3
CRW Rain Shower System Shower Faucet Sets Triple Function Chrome with Adjustable Slide Bar Shower Head https://www.amazon.com/dp/B01LALG9GQ/ref=cm_sw_r_cp_tai_hAIVDb1TJY2H4
there's stuff out there in that specific color, the thing is i don't know if it will work for your existing system
https://www.amazon.com/dp/B06Y3LK3NF/ref=twister_B06Y3GWT3D
https://www.amazon.com/Kingston-Brass-KB235AX-Shower-3-Cross/dp/B0026ZPK2A
https://www.amazon.com/Oulantron-Rubbed-Bronze-Function-Handheld/dp/B00UYRYSLQ
Sieht für mich wie eine altmodische Badewannen Armatur aus.
Gibt es fix. Kann grad mobil nicht schauen
(Auf die schnelle das hier gefunden, geht in die Richtung. https://www.amazon.de/Wandmontage-Zweil%C3%B6che-Mischbatterie-Schlauchbrause-Wasserhahn/dp/B012AF81U8 )
Where do they break?
I googled this, although I have zero experience with this type of thing.
https://www.amazon.com/Stainless-Steel-Handheld-Shower-Head/dp/B010SETSMS
so who is going to provide an amazon link for this thing?
Me I guess
Hand held version
> Can we get a tldr for each question and the specs or a couple bullets w/o commentary?
Sure:
https://www.amazon.com/dp/B00KL6UN5K
rather than buying the trim and roughin valve (on the same page) separately?
And thanks for the advice about the plumber. I intended to talk to him beforehand anyway, but you make an excellent point about making sure he has everything he needs, and is happy with the parts, before he starts.
In fact, forget the plumber, I may not even get this past my builder. That's why I posted here, in case it was too stupid to even ask him about it. But a guy above said he had built systems similar to this, so I'm encouraged.
BlackFriday Promotion: Enter code"HBTML248", Save $10 for: CO-Z Bathroom Clawfoot Bathtub Shower Combo Faucet (Friday to Sunday)
From the description a handle like this sounds like what I need but frankly I do not understand the plumber talk :)
https://www.amazon.com/T27867-Angular-3-Setting-Integrated-Diverter/dp/B01M3PZK9T/ref=pd_bxgy_3?_encoding=UTF8&pd_rd_i=B01M3PZK9T&pd_rd_r=2103dd42-f373-11e8-9f0a-0f336f5f387a&pd_rd_w=tmejK&pd_rd_wg=xc4EQ&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=6725dbd6-9917-451d-beba-16af7874e407&pf_rd_r=MYNG116YEWFVE3S6GPFB&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=MYNG116YEWFVE3S6GPFB
I just bought a bunch of shower equipment on amazon.
​
I keep a eye on warehouse deals and buy stuff that is like new.
Search Hansgrohe, kohler, symmons, and other high end fixtures.
​
Got this for
https://www.amazon.com/gp/product/B06XWHNCNS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
$170 Mostly metal construction. Except for the shower handle echelons. Most all shower wands are plastic now so if you drop it won't break the tile.
Got this one
https://www.amazon.com/gp/product/B007TAO6VS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
for 200
This one is nice and heavy. Good construction
Neither of these come with the rought valves or diverter.
​
Got this one for
$180
https://www.amazon.com/gp/product/B01MXEFM09/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This one is a piece of art solid and came with the rough in valve.
I don’t know where you are but have you looked up Belanger three handle tub shower chrome trim?
I can basically only find the valve kits that come with the trim.
Plumb Pak 3060W Bathtub/Shower Faucet with Diverter Valve, Polished Chrome Finish https://www.amazon.com/dp/B011BIP89W/ref=cm_sw_r_cp_api_i_mc6TDb5JEY194
Family member called plumber and he couldn't remove the valve - told me to remove the tile and contact him next week. Removing the cover did little to expose the pipes connected to the diverter. Basically, I'm going to be replacing the valve and handle completely; disconnecting the three pipes (2 in, 1 out) and connecting them to the new item.
https://www.amazon.com/Symmons-9600-P-Origins-Shower-Chrome/dp/B01MYR1VLN
Can you see if that includes everything? I need both the cover/handle AND behind-the-wall body/inlets.
Himylen HS412001 ?
https://www.amazon.co.uk/Himylen-Chrome-Finish-Faucet-Shower/dp/B00SS39CXW
I'm just going to leave [this] (https://smile.amazon.com/Concealed-Thermostat-Shower-Rainfall-Brass/dp/B06XTNFNMF/ref=sr_1_30?ie=UTF8&qid=1492729298&sr=8-30&keywords=led+dual+showerhead) here...