(Part 2) Top products from r/HondaElement

Only my second time doing it, so I'm no expert.

I bought the Mequires clay kit.

Washed the car thoroughly.

Dried with a chamois.

Started with the roof because it's the hardest part, it had tree sap and would require additional work, and I'm putting a roof rack on soon.

You want to do this in the shade for many reasons, but the biggest reason is you want the panels cool so the spray solution stays on the panel longer. It's a lubricant of sorts so the clay slides easier.

Work the clay over the entire panel, spraying more solution as needed. I recommend doing small sections at a time.

Periodically wipe the section down with the supplied microfiber cloth and inspect your work. You should feel an obvious difference between a clayed area and an untouched area.

Once you've completed the job, apply wax so the paint is protected. I have always used carnauba paste waxes so I stuck with Meguiar's Gold Class. Paste is more difficult to apply but I feel I get better application than liquid.

I also mask off the edges of the plastic and trim because wax is a PITA to remove from them. And I can be a little sloppy with the application.

I'll try and get some before and after close-up pictures when I do another panel.

I can confirm
I bought these Sachs SG225002 Lift Support https://www.amazon.com/dp/B000WO4JPQ/ref=cm_sw_r_cp_api_i_PrqUCb3A7ZQKP
They fit perfectly on my 07 EX, and add a bit of extra height (what I wanted so I can walk under it) but I have to be careful not to get hit in the face as it opens VERY strongly

It was my first time driving with the kayaks loaded and strapped down so I took it easy. About 30 miles at 60mph. When I got off the freeway I checked how secure the straps were and everything held nicely.

I bought these kayak racks.

Bought one of these. Pricey but easy to put on and I haven't thought twice about it. I would recommend it.

Genuine Honda 08P33-SCV-100 Seat Cover https://www.amazon.com/dp/B001EEC45A/ref=cm_sw_r_cp_awd_B.R8wbWJMSXQ4

After using different products found at auto parts store, an auto detailer recommended this: https://www.amazon.com/gp/product/B006NZRAFE/ and it's been the best and longest lasting so far.

Thanks. Found this thread:
http://www.elementownersclub.com/forums/showthread.php?t=41502&highlight=door+lock+actuator

And this:
http://www.elementownersclub.com/forums/showthread.php?t=41442

Part looks to be ~$60:

https://www.amazon.com/gp/product/B00BFDHZCM/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

https://www.amazon.com/Coleman-2000020271-ComfortSmart-Camping-Cot/dp/B0075D2J2C/ref=pd_bap_m_rp_26?_encoding=UTF8&pd_rd_i=B0075D2J2C&pd_rd_r=c6b8fb29-f4fc-4072-a296-cf576827bbda&pd_rd_w=sxOTy&pd_rd_wg=JEZ9y&pf_rd_p=7092fda7-28a2-4e44-9254-b40e2cad6f55&pf_rd_r=PV2PC48QE537J45PC87H&psc=1&refRID=RNZCKBMFT2QHPA60TYR4&th=1

If you take the back seats out this fits behind the passenger seat nicely. And you can put boxes underneath. However you won't be able to stretch out on it if you're taller than 5'4"

Power from an RV post is typically referred to as 'shore power'. This instructible is about adding shore power to a vehicle, however he doesn't add an inverter to connect it up to his car battery. If you took one of the power lines and ran it to an ac to dc inverter you could then run it to charge the car battery. You could also add in a deep cycle marine battery to store power when no shore power is available. You would want to add the battery in the circuit so it's before the internal power plugs.

​

I hope this helps you find an answer you are looking for!

I've heard good things about this stuff for faded trim: https://www.amazon.com/Wipe-New-WN6PCMSTRRT-Trim-Restorer/dp/B00AYXM4DY

In a pinch you can also use foam tire shine, but it will only stay on for a couple days.

They're on Amazon for around $50. Dorman 748-131 Honda Element Front Driver Side Power Window Regulator with Motor

No problem!

Head Unit

Wiring harness

Double Din Mounting Bracket

Antenna Adapter

• You may not need this.
  
  Backup Cam
  
  Android Auto / Apple Car Play Adapter
  
  
• required if you want android auto/Apple Car Play to work. Eonon makes other units that do not require this adapter.

I installed the replacement clip, it's looks identical to the original. I still struggled to get it to go in properly, but it seems to be in place. If you want to buy some the link is below, and if you live in the US I could probably be talked into shipping you a handful of them for just the shipping costs.

https://www.amazon.com/Honda-Interior-Push-Type-Clips-91550-S50-000ZL/dp/B0040CWVBU

I used these magnets:

25 Round Disk Magnets Crafts Home Office Part 3/4" https://www.amazon.com/dp/B000RB7E5Q/ref=cm_sw_r_cp_api_i_zE05Ab3C2ZD5N

And this screen
Shatex Fiberglass Door, Window Screen, Fiberglass Mesh Insect Barrier, 48"x84" https://www.amazon.com/dp/B01NBHWRDH?ref=yo_pop_ma_swf

And just cut the screen to size and magnet it on. Cheap and easy. Got the two front windows, sunroof and extra from this.

These are the LED headlights I used.

Stock bulb Vs LED

And this is the USB.

USB installed

I had to use this device to integrate steering wheel controls on a 2011 EX - https://www.amazon.com/gp/product/B00B4PJC9K/

Just ordered this one. We'll see...

https://www.amazon.com/Bushwhacker%C2%AE-Barrier-Smaller-Restraint-Backseat/dp/B0076A0M6Y/ref=mp_s_a_1_3?keywords=Bushwhacker&qid=1556424130&s=gateway&sr=8-3#

Also not cheap I use the Ram Mount X-Grip: https://smile.amazon.com/dp/B0066BWMNU/ref=cm_sw_r_cp_awdb_t1_dtMwCbFD2QK3H