(Part 2) Top products from r/accord

Jump to the top 20

We found 12 product mentions on r/accord. We ranked the 29 resulting products by number of redditors who mentioned them. Here are the products ranked 21-40. You can also go back to the previous section.

Next page

Top comments that mention products on r/accord:

u/GonadsOfWrath · 2 pointsr/accord

If you struggle with vision at night, changing to LED will only create the illusion of better vision at night.

Your Accord takes H11 low beams, and these are much, much brighter than stock. They will drop right into your Accord with 0 modifications needed. Your Accord is only 2 or 3 years old, and therefore more than likely still on its original, factory bulbs, which are the long-life type. Long-life bulbs put out very little light to begin with, and as the bulb ages, they put out even less light. Here's an example of what happens when you toss the factory bulbs for performance halogen bulbs.

Do you use your high-beams a lot?

u/hallstevenson · 1 pointr/accord

Are these adapters (GROM, Parrot) in the $150 range ? If so, that's not as bad as I was thinking....

Budget option is something like this: https://smile.amazon.com/Yomikoo-Interface-Connector-2003-2011-2006-2010/dp/B01EUZ90II/ref=sr_1_1?qid=1568856305&refinements=p_n_feature_keywords_browse-bin%3A3822502011&s=electronics&sa-no-redirect=1&sr=1-1&th=1

Get one of these and plug it into the USB connection: https://smile.amazon.com/Firefly-Bluetooth-Receiver-Smallest-Streaming/dp/B01HDO66NK/ref=sr_1_1?keywords=tunai&qid=1568856552&s=electronics&sr=1-1

Do NOT connect the 1/8" cable to your phone though. Connect it to the Bluetooth receiver. Looks like you'll need a 1/8" female to 1/8" female "coupler" too. This seems very clutzy the more I think about it though.....

u/mere_iguana · 1 pointr/accord

https://www.amazon.com/DLZ-Suspension-Kit-Front-Assembly-Compatible/dp/B01H05VKJW/ref=sr_1_9?keywords=1997+accord+suspension&qid=1562075357&replacementKeywords=suspension&s=gateway&sr=8-9&vehicle=1997-59-751------------&vehicleName=1997+Honda+Accord

:)

If you're gonna do ball joints, might as well do all of it while you're in there. It's so cheap, why not.

Throw in a set of struts and strut bushings for another $150-200 and that thing will ride like it's 1997 again.

I bought this kit, it came with upper + lower control arms, and most of the ball joints already pressed in. that first kit above one only has the uppers. https://www.amazon.com/gp/product/B0792FYGJ9/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

u/stinkyfeetnyc · 1 pointr/accord

A01 being counterfeit?! That's not good. Saw on Amazon a seller by the name of Aracoware selling the seemingly original Honda filters.

https://www.amazon.com/Honda-15400-PLM-A01-Oil-Filters-Case/dp/B009K4H42Y

The reviews seems legit.

Regarding Bosche selection, it's only because it's has Filtech labeling on it 😑 so in my noob mind thinking it would be comparable to the OEM.

Regarding the fitting, I've read that oil filters aren't a universal fit so that's why I'm asking.

u/Ranguvar · 2 pointsr/accord

PAC AAI-HD3 https://www.amazon.com/dp/B00H26468M

Works well, no issues on my 04.

u/luketabor · 1 pointr/accord

Doesn't look like McGard makes ball-seat wheel locks. These are the most affordable option I've found for Honda-compatible wheel locks: https://www.amazon.com/gp/product/B01KZULYMC/

Or they offer this option where you replace all of your lug nuts with wheel locks. Seems like this would at least slow down the "hammer a socket on there" attack: https://www.amazon.com/gp/product/B01KZULYRC/