Reddit reviews 3-IN-ONE 100355 Multi-Purpose Oil, 3 OZ
We found 6 Reddit comments about 3-IN-ONE 100355 Multi-Purpose Oil, 3 OZ. Here are the top ones, ranked by their Reddit score.
material type: Resin
It's true, that's why you use magic instead.
I wouldn't recommend WD-40, it attracts dirt and can lead to more problems sooner, it was originally a polish. I'd recommend a lubricant, like 3 in 1 Household Oil, or a silicone lubricant.
Here you go: www.amazon.com/dp/B0002JN5PG/ref=cm_sw_r_cp_tai_jVNoDbZ0VE416
I use this to stop mine from squeaking. Just put a little drop on both sides of the wheels and spin it so it spreads out. Have to do it like once a week to keep it quiet.
WD40 will work well, but it's not the best for long term prevention maintenance, can get tacky over time.
You'll want something like this
Thin machine oil, knife oils, etc. Your local hardware store will have something that will work.
Vegetable oil will work, but I wouldn't recommend it for long term maintenance.
You can spend a lot of money on fancy Knife oils, but I honestly don't see the point for relatively cheap nippers. They're a good idea for your $400 cutlery but for $30 nippers, it's overkill.
So stuff like this? Also, how do you apply grease/lubricant to the bearings? The rails/worm gear I’m assuming it’s directly applied, then the axis is moved up/down/left/right to apply throughout.
Zoom-SPOUT Sewing Machine Oil Oiler ~ 4FL. OZ.(118ml)
https://www.amazon.com/dp/B00BYCKTW2/ref=cm_sw_r_cp_api_6cPJBb3ZHQ8QH
3-IN-ONE Multi-Purpose Oil, 3 OZ
https://www.amazon.com/dp/B0002JN5PG/ref=cm_sw_r_cp_api_HcPJBbYNBTFVR
Super Lube 51010 Oil Super Lube
https://www.amazon.com/dp/B000BXOGHY/ref=cm_sw_r_cp_api_DdPJBbVT5E89G
Super Lube 21010 Synthetic Grease (NLGI 2), Blistered, ½ oz Tube
https://www.amazon.com/dp/B000BXKZQU/ref=cm_sw_r_cp_api_-dPJBbN0D6KVT