Reddit Reddit reviews 5 Pcs Dual Row 12 Position Screw Terminal Strip 600V 15A + 400V 15A 12 Postions Pre Insulated Terminal Barrier Strip Red/Black 10 Pcs

We found 2 Reddit comments about 5 Pcs Dual Row 12 Position Screw Terminal Strip 600V 15A + 400V 15A 12 Postions Pre Insulated Terminal Barrier Strip Red/Black 10 Pcs. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Electronic Components
Interconnects
Terminal Blocks
Ground Circuit Terminal Blocks
5 Pcs Dual Row 12 Position Screw Terminal Strip 600V 15A + 400V 15A 12 Postions Pre Insulated Terminal Barrier Strip Red/Black 10 Pcs
600V 15A 12P (Dual Row) Barrier Terminal Block, Strip Material : Brass, Screw+Washer: Zinc plated IronSize : 125 x 22 x 17mm/ 4.92" x 0.87" x 0.67" (L*W*T);Color : Black400V 15A 12P Fork Type Terminal Stripe, Material : Brass, PVCTerminal Stripe: Inside Width : 3.9mm/0.15";Outside Width : 6.1mm/0.24"; Pin Pitch : 2.7mm/0.1";Fork Total Width : 103mm/ 4.1";Sleeve Total Width : 100mm/ 3.94"; Total Height : 21mm/ 0.8"Package Content : 5 x Barrier Terminal Block; 10 x Terminal Stripe (Red:5, black:5)
Check price on Amazon

2 Reddit comments about 5 Pcs Dual Row 12 Position Screw Terminal Strip 600V 15A + 400V 15A 12 Postions Pre Insulated Terminal Barrier Strip Red/Black 10 Pcs:

u/AMartin56 · 1 pointr/PinballFX3

You might also consider these:

http://www.ultimarc.com/goldleaf.html

I find that they're a bit unusual in that:

They support a normal 3/4 inch cabinet...

...but are low profile (things can get tight around the flipper buttons... especially on the plunger side).

I'm not entirely sure if the are compatible with the Zeb wiring harnesses (I don't know if his end in bare wire or spade connectors) but either way you could do a no solder install with those buttons and one of these:

https://www.focusattack.com/16pc-22-awg-wire-with-110-quick-disconnect/

One (but maybe two if your cabinet is wide) of these:

https://www.focusattack.com/10-connection-22-awg-110-ground-daisy-chain-wire/

And one of these:

https://www.amazon.com/gp/aw/d/B01DY7L5KY?psc=1&ref=ppx_pop_mob_b_asin_image

Note that all buttons are not compatible with these harnesses. There are two common spade connector sizes (.110 and .187).

Also...it's really useful if your video card has multiple outs. I use one display port and two HDMI outs.