Reddit reviews Bon 32-504 3/4-Inch Nylon Concrete Fibers

So as promised here are the majority of materials/tools I used to make the counters. I used the stain instead of actually coloring the concrete as I was worried about getting inconsistent coloring since I was doing multiple batches.
Now, my mistake I made which turned ok after the fact was that the concrete became too dense for the stain to penetrate. Despite using the sawzall to try and vibrate the air bubbles out from the bottom of the concrete but I was not able to get all of them out so there was pin holes on some of the counters. So I made a slurry as recommended and filled in all the holes and then sanded the high spots down. So when I stained the counters the areas that had been filled with slurry took to the stain very well but the actual concrete only became a darker grey. I communicated with a staff from ConcreteSolutions and they were very helpful in trying to get the stain to penetrate the concrete. I stained it probably 3 times and then just left it as it was and now I really love how it turned out despite not being as planned. Its almost like a black and grey leopard spot on most of the counters, the island area was the last poured and had hardly any air bubbles so its more solid color…
I let them sit and harden at least a week before I flipped them over and started sanding away. I did not want a exposed aggregate look so I had to be careful about sanding too much…
The stain and sealer work great and like the other user said, liquid just sits on an it and doesn’t not penetrate.
If you have any questions ask away- I had lots of friendly people help me on other forums and was very thankful for their help….

Chengs Book
http://www.amazon.com/dp/1561584843/ref=pe_385040_30332190_TE_3p_dp_1

Sealer
http://concretecountertopsolutions.com/products/sealers-and-polish/z-siacryl-14-sealer/

Polish
http://concretecountertopsolutions.com/products/sealers-and-polish/z-counter-shine-polish/

Dye/Stain
http://concretecountertopsolutions.com/products/stains-and-integral-colors/z-aqua-tint-dye/

Nylon Fibers
http://www.amazon.com/gp/product/B000COCDCM

SUPERPLASTICIZER
http://www.ebay.com/itm/-/161011304020

Diamond polishing pads
http://www.amazon.com/gp/product/B00AB1UMOW

Variable speed polisher
http://www.harborfreight.com/power-tools/polishers/7-in-10-amp-variable-speed-polisher-60626.html

I only have experience with concrete but this is a type of additive that might be suitable, also glass fibers will add strength or really anything that will help give it some structure and rigidity https://www.amazon.com/32-504-4-Inch-Nylon-Concrete-Fibers/dp/B000COCDCM/ref=pd_sim_469_2?_encoding=UTF8&psc=1&refRID=2H3PGMH6CYWM50GJFTM3