Reddit reviews Cable Matters UL Listed in-Wall Rated (cm) Bare Copper Cat 6, Cat6 Bulk Cable (Cat6 Ethernet Cable 1000 Feet) in Blue
We found 7 Reddit comments about Cable Matters UL Listed in-Wall Rated (cm) Bare Copper Cat 6, Cat6 Bulk Cable (Cat6 Ethernet Cable 1000 Feet) in Blue. Here are the top ones, ranked by their Reddit score.
High Performance Cat6, 23 AWG, UL Listed (E485863), CM Rated, Copper Ethernet Bulk Cable is an ideal choice for wiring your home or office for high-speed networkFuture-proof your network for 10-Gigabit Ethernet (backwards compatible with any existing Cat5e cable network); Foot-marked jacket help you to track the remaining amount of cable left in the easy-to-pull boxA Category 6 Bulk Ethernet cable is also referred to as a Cat6 network cable, Cat6 cable, Cat6 Ethernet cable, or Cat 6 data/LAN cable. A wired Cat 6 network is more reliable and secure than a wireless network or Cat 5 cable network for your internet connectionsBare copper conductors enhance cable performance and comply with specifications for communications cables; Meets or exceeds Category 6 performance in compliance with the TIA/EIA 568-C.2 standardSolid and durable Cat6 cable with high bandwidth of up to 550 MHz guarantees high-speed data transfer for server applications, cloud computing, video surveillance, and online high-definition video streaming
You want UTP - Unshielded Twisted Pair
You can go through the ceiling of a basement (finished, drop ceiling) or along the top of a basement (unfinished) or along the bottom of an attic. I also have a wire snake to pull them through the walls to go up and down. So you cut a hole for the plate, then either drop the cable snake down the wall from the attic to the hole or from the basement to the hole and tape the end of the cable on and pull it through. Then pull it to wherever your [punchdown panel]/[switch]/[router] is and either make an end and plug it in or punch it in to your punchdown panel. On the other end you punch down the jack and screw it in and you're set.
Supplies:
Cat5e or Cat6 cable
Keystone Jack
Wallplate
Low Voltage electric box
RJ45 Ends
If you are interested, I can write a more detailed guide and a tools/optional supplies list later.
Da fux it dont: https://www.amazon.com/Cable-Matters-Wall-Rated-Ethernet/dp/B0049KV52E
You don't need a patch panel.
All you need is cable and a switch.
http://www.amazon.com/gp/product/B004ELA0SS/
http://www.amazon.com/Cable-Matters-In-Wall-Rated-Ethernet/dp/B0049KV52E/
http://www.amazon.com/gp/product/B000FI9VTS/
http://www.amazon.com/Platinum-Tools-EZ-RJ45-Crimp-RJ-11/dp/B00084Y1ZI
When I installed it in my uncle's house I did do it myself. It was expensive.
Total: $414
You're right about the tools but once you get Cat6 wired up in your house when would you need to do it again? I don't think Cat6 is going away anytime soon.
Run one drop on the walls where you know you won’t need additional drops there. If you need to use the single drops in the future, just bring in a switch. For the locations that you need more than one drop right now, just run the additional cables. It’s best to avoid switches in your network.
This is my setup:
Tripp Lite 9U Rack
Cable Matters patch panel x2 - 1U
UniFi switch - 48 port - 1U
UniFi bundle (cloud key, AP, security gateway)
Tripp Lite UPS - 2U
I used Cable Matters Cat6 . If you go with another brand, make sure it doesn’t contain CCA conductors, you want full copper.
Try to avoid surveillance solutions that rely on wireless connectivity, I’m not a big fan of it. Ubiquiti’s surveillance gear isn’t that bad, I believe the UniFi G3 has two way audio.
I guess? Considering how much ground you can cover with it, it is really good value. 1000 ft will do several houses, for most people:https://www.amazon.com/Cable-Matters-Wall-Rated-Ethernet/dp/B0049KV52E/ref=sr_1_3?ie=UTF8&qid=1488041471&sr=8-3&keywords=cat6+bulk+cable+1000ft So it may not be as bad as you think.