Reddit reviews CanaKit Raspberry Pi 2 Ultimate Starter Kit with WiFi
We found 40 Reddit comments about CanaKit Raspberry Pi 2 Ultimate Starter Kit with WiFi. Here are the top ones, ranked by their Reddit score.
Includes Raspberry Pi 2 (RPi2) Model B Quad-Core 900 MHz 1 GB RAM8 GB Micro SD Card (Class 10) pre-loaded with NOOBS, CanaKit WiFi Adapter, CanaKit 2.5A Power Supply with 5 feet Micro USB Cable and Noise Filter (UL Listed)High Quality Raspberry Pi 2 Case, Premium Quality 6.5 feet HDMI Cable, Heat Sink, CanaKit Full Color Quick-Start GuideCanaKit GPIO to Breadboard Interface Board, Ribbon Cable, Breadboard, Jumper Wires, GPIO and Resistor Colors Quick Reference CardsRGB LED, 8 x LEDs (Blue/Red/Yellow/Green), 15 x Resistors, 2 x Push Button Switches
No, that's pretty over priced.
https://www.amazon.com/dp/B00G1PNG54/ref=cm_sw_r_awd_RCsDub130VHMH
Here is a set with almost the same stuff for much cheaper.
Amazon also has this: https://www.amazon.com/dp/B00G1PNG54/ref=cm_sw_r_awd_4iDoub0F7FHVY
That looks like an excellent all-in-one option for him.
There are many projects for the Pi that are well-developed and documented, and although most of them are network or computer-oriented, plenty use the GPIO as well. You might consider getting a starter kit that includes jumpers and solderless breadboards, resistors, and LEDs for more free-form projects in the future.
Without the GPIO, a 14 year old might like:
A delicious snack for guestsWith the GPIO:
There are many things available with the Pi and some basic tools. This CanaKit includes most of the basic bits (assuming you don't have general electronics components around the house). You might consider adding on a few basic electronics tools down the road (maybe birthday gift or whatnot).
Overall, I've found the RasPi community to be friendly and fairly open to new learners, so you can feel fairly safe turning him loose on /r/raspberry_pi or #raspberrypi.
Oh! My SO and I got each other almost exactly the same gift (we're nerds who are very alike sometimes)! I got him a Raspberry Pi B+ Ultimate Starter Kit, and he got me a Raspberry Pi B+! It was awesome. :)
a Canakit has a lot more to start with. Pretty much everything you need to make simple projects right out of the box.
I recommend getting a Raspberry Pi. There are a ton of projects you can do that involve a little bit of circuitry. You'll also need to know how to program with these (there are a ton of tutorials all over the internet).
I recommend getting one of these kits:
http://www.amazon.com/CanaKit-Raspberry-Ultimate-Starter-Components/dp/B00G1PNG54/ref=sr_1_1?ie=UTF8&qid=1418544342&sr=8-1&keywords=raspberry+pi+kit
http://www.amazon.com/Raspberry-Ultimate-Includes-Essential-Accessories/dp/B00MR2HR6O/ref=sr_1_9?ie=UTF8&qid=1418544342&sr=8-9&keywords=raspberry+pi+kit
Also, subscribe to /r/electronics.
There's a lot of Raspberry Pi kits on Amazon that come with wires, a breadboard, some LEDs, and other electronic components. The CanaKit Ultimate is one such kit that's a good price for what it contains. In addition to the Pi kit get him some books with interesting projects.
These are all pretty good books and have interesting projects. If your son is actually interested in engineering don't let him just stick XBMC or RetroPi on the thing and call it a day. While those projects might be interesting in their own right you're not really learning much if you're just assembling a video player or video game emulator.
If he puts together some interesting projects with the Pi get him a Radio Shack gift card for his birthday. They're trying to get back to being the electronic hobby retailer of choice so they're carrying Pis, Arduinos, and stocking more electronic components.
What's nice about a good kit is a lot of the components will be useful in other types of projects. Breadboards and good wires work just as well on an Arduino as they do on a Raspberry Pi.
Maybe something like this?
http://www.amazon.com/CanaKit-Raspberry-Ultimate-Starter-WiFi/dp/B00G1PNG54/ref=sr_1_fkmr2_3?ie=UTF8&qid=1450379419&sr=8-3-fkmr2&keywords=raspberry+pi+tor
I'm an ECE that got into Raspberry Pi about a month ago. I work in microelectronics (chip design), and wanted to use it to get back into larger scale electronics hacking and to do some more hardware oriented programming and projects.
As such, I had to basically reform my electronics gadget supply at the same time since I ditched my college collection a while back when moving to a new house.
Here's some of the key things I bought to go with my Pi that I felt I needed. I'm assuming you're like me and want to work on electronics hardware (lights, switches, etc).
Beyond those basic starter components, the rest is up to your imagination and what you want to do next. In my case, I plan to drive higher current components, so I'll be using optocouples and relays eventually. And I plan to make my own PCBs to snap onto the Raspberry, so I have PCBs, headers, and soldering stuff.
If you're new to the Raspberry, there's online resources out there. I also got this book off Amazon as a starter as well, which I've been coupling with online resources.
On the Arduino side, that's my next purchase since I may find it easier to have the software and server side of one of my projects on a Pi, and the hardware interface on an Arduino. I'm just going to get an R3 board to start since I have the rest of the stuff they usually include in a starter pack listed above.
This blog did a nice writeup comparing some Arduino R3 starter kits:
https://www.pretzellogix.net/2014/10/09/three-arduino-starter-kits-compared-and-reviewed/
They're not really a gaming thing, but I think most any tech savvy person would appreciate it and could probably find some use for one. Maybe they could set it up to play some simple old school games like pong or something (I haven't actually used one myself, so I'm not sure of their limitations). That sounds like a great idea actually.
Edit: Something like one of these seems like it would be pretty neat.
Hi there, sorry for the late answer I was out for the week-end!
It will depends highly on what you expect him to do with it, and also your budget. But for the more standard it will be at least:
Then there can be:
And I confirm, it can be a pretty cool gift for a friend to build :)
the usb bus is iffy? so if i wanted to get one, and plug an ODAC into it, it would not work (as long as the OS was ok with it)? or just be shitty?
http://smile.amazon.com/CanaKit-Raspberry-Ultimate-Starter-Components/dp/B00G1PNG54/ref=sr_1_2?s=pc&ie=UTF8&qid=1409879942&sr=1-2&keywords=raspberry+pi
http://www.hifiberry.com/products/digi-connect-your-external-dac-2/
http://volumio.org/
Raspberry Pi 2 Model B
Get one of the more complete kits on Amazon and you're all set. The only real limitation is the 10/100 Ethernet, but that should still be fine for most home broadband connections if you connect it directly to the router.
You can also add a gigabit ethernet USB dongle if you really want more bandwidth, but that would only get you to just over 200 Mbps due to limitations in the USB 2.0 shared bus system. Again, though, you likely won't have that much bandwidth with home broadband connections anyway.
Kit:
http://www.amazon.com/gp/aw/d/B00G1PNG54
Faster Ethernet info:
http://www.midwesternmac.com/blogs/jeff-geerling/getting-gigabit-networking
If you had a keyboard and monitor at your disposal, or are very crafty, you could make a Raspberry Pi work for those purposes.
Other than that, I have no idea.
The Raspberry Pi by itself is just a board. Like a PC, you need other stuff to make it work -- at the very least, a power supply and an SD card on which to install the OS. A kit like this gives you the power supply and a case, or you can go bigger and get a kit that includes power, case, wifi, hdmi cable, and a preloaded SD card. For htpc purposes, you don't need a kit like this, which includes a bunch of components that you aren't going to use (LEDs, breadboard, breakout cables, wires, etc -- stuff that you'd use if you were going to use the pi to build projects, but is unnecessary for a media player).
Don't bother with any heatsinks or fans. The RPi doesn't need them even for overclocking. Case quality can vary, but even the cheap cases are generally decent. You'll want at least a 2A power supply, especially if you intend to plug in external HDDs that don't have their own power source. And if you don't go with a kit that includes an SD card, make sure you buy a good quality card instead. That's your only storage on the device, so you want it to be as reliable as possible. Which means no bargain basement, "10 for a dollar" cheap SD cards. Go with name brands like Samsung.
And finally, /r/raspberry_pi. They're big on the Zero right now, but I'd suggest you go with a 2 B instead (quad core and more RAM makes it worth the extra cost).
CanaKit Raspberry Pi 2 Ultimate Starter Kit with WiFi https://www.amazon.com/dp/B00G1PNG54/ref=cm_sw_r_other_awd_KGVNwbGX9M0MR
Wireless Keyboard and mouse, as well as a Raspberry Pi Zero.
You and I have a lot in common OP as a 23 year old male software engineer who enjoys video games and fantasy type stuff. I just moved out of my parent's house this past March and like another commenter said, you will get hammered with expenses you might not have thought of. I had to go out and get all sorts of kitchen cookware and dishes and linens etc. So depending on your timetable I would HIGHLY recommend either asking for that stuff now or for gift cards to places you can get that stuff at. I'm asking this Christmas for kitchen stuff because i still haven't got around to getting everything I need.
Do you drink beer? What about pint glasses with Game of Thrones or World of Warcraft logos? Hell, check out other things on thinkgeek.com, there is a load of stuff on there that is pretty neat.
You mentioned you like DIY projects but are limited on this? Do you mean in terms of space and tools? What about things like Arduino or Raspberry Pi kits that don't take up tons of room or extra tools? You can develop some pretty cool DIY applications with those.
Does your girlfriend play video games? Recently my girlfriend has gotten into games more so I am always on the lookout for games we can play together, especially couch co-op type games. Or maybe check out some board games, there are some pretty cool RPG type games you can get into that you both can play together. Or maybe movies or TV shows you can watch together.
Do you sit at a desk at your job? You could always ask for little things to put on your desk or in your office/cubicle, whether it be small posters or a unique stress ball or something. Last year my girlfriend got my a little Hobbit lego set I have set up on my desk along with a football shaped stress ball. Maybe something like that depending on your work/job situation?
I am still trying to think of more stuff but hopefully this helps, let me know!
http://www.amazon.com/CanaKit-Raspberry-Ultimate-Starter-Components/dp/B00G1PNG54/ref=sr_1_2?s=electronics&ie=UTF8&qid=1417843485&sr=1-2&keywords=Raspberry+Pi
Hope I'm not stepping on Agiss' toes here.
The rpi b+ takes a microsd. The model b and lower takes a regular sd card. An ethernet cable will work in place of a wifi dongle, but the dongle does make things a bit more movable. (cordless. Also they are pretty inexpensive.)
GPIO stands for general purpose input output. These pins allow your raspberry pi to interact with things like LEDs and other external electronics.
I'm not sure if your phones power supply is ok, but the recommended power supply for an rpi is a 5v DC microusb cable.
More information on the rpi's hardware can be found on the wiki here
If you aren't keen on searching around for exactly what you need, canakit has a couple of starter kits that include basically everything you need. (Just as a note, if you do go with the canakit route, make sure you have a microsd slot or adapter for your computer, since some of them come with just a microsd card.)
Edit: here is the kit I have, which came with everything but a microsd->sd adapter (it also came with supplies for getting started using the GPIO pins.)
canakit will give you everything you NEED to get started.
Deluxe kit on sale This kit has the extras if they are interested in electronics as well.
I've ordered over 50 of these units for projects. They work great together.
For those interested:
A good starter kit for $70:
http://www.amazon.com/dp/B00DG9D63A
A deluxe starter kit (do a lot more than XBMC) for just $10 more:
http://www.amazon.com/CanaKit-Raspberry-Ultimate-Starter-Components/dp/B00G1PNG54
A good remote controller will run you $25, but if you have a smartphone or tablet you can download the official XBMC remote control app free:
iOS:
https://itunes.apple.com/us/app/official-xbmc-remote/id520480364?mt=8
Android:
https://play.google.com/store/apps/details?id=org.xbmc.android.remote
Something like this?
http://www.amazon.com/gp/product/B00G1PNG54
http://www.amazon.com/gp/aw/d/B00G1PNG54/
Something like this. Check out Adafruit or Sparkfun for similar kits.
http://www.amazon.com/gp/aw/d/B00G1PNG54/ref=mp_s_a_1_1?qid=1421889987&sr=8-1&pi=AC_SY200_QL40&dpPl=1&dpID=61GAHm7YnvL&ref=plSrch
Non-mobile: http://www.amazon.com/dp/B00G1PNG54
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
I was watching this thread and found out that RPI kits are currently on sale on amazon. Pretty killer deal, and a lot of the other components I needed for emulation were on sale too. I was able to put together everything I need for a portable (and cordless) emulation station for about $170 shipped.
Edit: This includes the 7" monitor that will be mounted on the carry case.
Currently two cheap options from two different sources. I ended up going with the CannaKit version. The differences I spotted in the two that might make the price increase reasonable are:
-Cheaper: Kingston memory v Canna: Samsung memory
-Cheaper: No listing on power source rating v Canna: listed rating for RPI B+
-Cheaper: Clear case v Canna: Black case
-Cheaper: smaller profile wifi dongle v Canna: a bit bigger.
Otherwise components will probably be exactly the same. There are other kits from both companies with less or more options. This package seemed like a good starting point for a lot of different projects.
http://www.amazon.com/gp/product/B00LAAZKXQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
http://www.amazon.com/CanaKit-Raspberry-Ultimate-Starter-Components/dp/B00G1PNG54/ref=sr_1_2?s=electronics&ie=UTF8&qid=1422629217&sr=1-2&keywords=raspberry+pi
normally I would agree with you, but since its the sale it looks like it would be worth it, so I figured I would ask. Here is the breakdown.
Kit - 69.99 on sale
Individual - 74.55 (didn't bother including the manual or hdmi)
So, objectively, it would be cheaper, unless i wanted to swap out specific parts (but I'm a noob, so I'm not sure what I need yet). So, instead of buying it individually, should I go for the normal wifi kit or the deluxe kit?
It's definitely not "necessary" in the thought that "If I don't have the dongle, the pi won't work". It helps make things wireless. If you are near an ethernet port (or even have one), you can always use that too. The main things the internet helps with (on the pi), is downloading updates, downloading some files, and a few other minor things. It's like your laptop; "I can walk around with it without wifi and it's fine. If I need to download something, I just plug it in or turn wifi on".
That being said, there are two kits from Canakit that come to mind. This one is great, and pretty much has everything you need to get started.
This second one comes with more things like LED's, a breadboard, some other computing components, and leads to connect things up. I'm not really sure what he wants to do with all of this, but either kit will suit him fine. This also gives you an idea of what other things he might want with the pi
There isn't much difference there. The make and model of the SD card and the WiFi adapter are different, but they should perform the same. The Canakit shows, but doesn't mention the heat sink. The differences I see: the Canakit comes with a black case and a 2.5A power supply where as the Vilros kit comes with a clear case and a 2A power supply.
Non-mobile links: Canakit and Vilros, in case anyone else wants to look.
Depending on what accessories you want to add, you may need to utilize a powered USB hub, even with the four (4) ports on the B+ due to (potential) power issues. I think 2A is probably going to be plenty for most setups.
That brings it to the case...clear or black?
I've gotten stuff from both Canakit and Vilros and there have been no issues with any of it.
---
> What sort of limitations should I expect with this project? Thinking along the lines of certain emulators not working well (if at all), as well as streaming certain forms of content via Kodi.
I don't think I've had many, if any issues with SD (480p) and HD (720p) video content, but FHD (1080p) does seem to push the Pi. I've heard that a slight over-clocking could correct some of this. I also think there are some issues with higher end and "fancy" audio processing, but for me those issues are pretty much non-existent. For my media needs I use OpenELEC.
I have only started working with emulators on the Pi and so far things have worked pretty well. I followed a Lifehacker post and a post in DIY about setting up RetroPie and it seemed to cover most things. I have only tried NES, SNES, and Genesis and I have been happy with those. There are some of the higher-end emulators that may have issues (N64 is one that gets mentioned), but I haven't tried any of those other options, yet.
How about a Circuit Scribe set? http://www.amazon.com/s/ref=bl_sr_toys-and-games?ie=UTF8&field-brandtextbin=Circuit+Scribe&node=165793011 or a Raspberry Pi Starter Kit? http://www.amazon.com/CanaKit-Raspberry-Ultimate-Starter-Components/dp/B00G1PNG54/ref=sr_1_1?s=pc&ie=UTF8&qid=1418652530&sr=1-1&keywords=raspberry+pi&pebp=1418652534564
This seems to have everything you are talking about and a bit more (no speakers). It does come with the Pi too so maybe OP could give their parents the extra money it costs.
save some bucks
http://www.amazon.com/CanaKit-Raspberry-Ultimate-Starter-Components/dp/B00G1PNG54/ref=sr_1_1?ie=UTF8&qid=1417105983&sr=8-1&keywords=raspberry+pi+kit
Would this include everything I need to create the emulator or is it overkill?
I'm thinking Raspberry Pi + LEDs, a bag of cotton balls, and a hot glue gun. And Flirc if you absolutely have to have an IR remote, but a web page via phone would be a more robust controller.
http://www.amazon.com/CanaKit-Raspberry-Ultimate-Starter-Components/dp/B00G1PNG54/ref=sr_1_2?ie=UTF8&qid=1404306198&sr=8-2&keywords=raspberry+pi
if you get him a breadboard kit with it he can do alot of python programming for home made electronics, like at grage door controller for his smartphone, a weatherstation, a airborn drone, etc.
here is a link for a good kit: http://www.amazon.com/CanaKit-Raspberry-Ultimate-Starter-Components/dp/B00G1PNG54/ref=lp_3015426011_1_1?s=pc&ie=UTF8&qid=1409750864&sr=1-1
BTW, your officaly a Good Girl Gina
I meant to plug it into a windows PC to see what chipset it has. I just Googled CanaKit, and it appears to be a raspberry pi starter kit which ships with a Ralink RT5370. I don't know much about Ralink, as I've never owned one, but it looks like there are plenty of people having issues with it under Linux and various solutions that show up with Google. It looks like most of the solutions involve making sure lsmod shows the module as being loaded (and possible updating with a ethernet cable connected), and then configuring wpa_supplicant manually. Since this requires the system to be installed it doesn't really solve your issue. You might be able to get around some of this headache by creating a completely unencrypted connection on your router until you can set everything up and then lock it down once you're done.
Alternatively, you could download the OS image and load it onto your SD card from another computer, and then configure it.
I'm sure someone may have a better idea, I'm just going by 5 minutes of Googling.
A. this is not /r/raspberry_pi
B. buy this today for less and avoid random websites.
Well, I've been running Raspbmc for 4 or 5 months now. You pointed me here in my other post. I have an SD card (not sure on the class - it came with the Amazon starter kit) and a USB drive. That's as far as I've gotten, though. Hah.
So, to clarify - I'll be using an SD card AND USB flash drive?
Well, I had no idea what I was doing. Neither have I ever heard or seen Rapberries. :) I figured I'd buy it w/ all the bells and whistles (it came w/ A LOT of crap, resistors, all kinds of connectors, circuit board, wifi dongle). Next time I'll buy one, I'll make sure to shoot you a PM for an advice. :)
http://www.amazon.com/gp/product/B00G1PNG54/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Here is the desktop version of your link