Reddit reviews COMeap GPU VGA PCIe 8 Pin Female to Dual 2X 8 Pin (6+2) Male PCI Express Power Adapter Braided Y-Splitter Extension Cable 9-inch(23cm)
We found 9 Reddit comments about COMeap GPU VGA PCIe 8 Pin Female to Dual 2X 8 Pin (6+2) Male PCI Express Power Adapter Braided Y-Splitter Extension Cable 9-inch(23cm). Here are the top ones, ranked by their Reddit score.
『Solution』Convenient solution for adding two extra PCI Express ports to your existing power supply;『PCIe 8P female - Dual 8P(6+2)』The 8 pin PCIe female end to plug into the PCIe 8 pin male cable of the non-modular or semi-modular power supply and two 8 pin (6+2) male ends to plug into the video graphics card;『Compatibility』Compatible with common non-modular PSUs and semi-modular PSUs with PCIe 8 pin male cable; (Note: It does not work with Fully-modular PSUs.)『Compatibility』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, EVGA, Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, etc. (The 8 pin (6+2) ends could be used as 6 pin or 8 pin end by sliding on/off the 2 pin.);『Parameter』Length(including the connectors): 9-inch(23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs, Self-adhesive tape*1pcs;
Yes it should be safe. Do not use Molex connectors (not enough juice).
Assuming it has enough power I would get a PCIe spliter for it. I use something like this for my rigs:
https://www.amazon.com/COMeap-Express-Adapter-Braided-Y-splitter/dp/B072JR4H3N/ref=sr_1_1?ie=UTF8&qid=1512007576&sr=8-1&keywords=8+pin+psu+splitter
I actually use these guys to power 2 of my 1060s off of a single 8pin line.
These cables feel very thick and sturdy.
COMeap 8 Pin to 2x 8 Pin (6+2) PCI Express Power Adapter Braided Sleeved Y-splitter Cable 9-inch(23cm) https://www.amazon.com/dp/B072JR4H3N/ref=cm_sw_r_cp_apip_Lp61HwdWrl57k
What power supply is it?
https://www.amazon.com/COMeap-3-Pack-Express-Splitter-Y-Cable/dp/B072JR4H3N/ref=sr_1_2?ie=UTF8&qid=1505323341&sr=8-2&keywords=pcie%2Bfemale%2B8%2Bpin%2Bto%2B6%2Bpin%2Bmale%2Badapter&th=1
COMeap 8 Pin Female to 2x 8 Pin (6+2) Male PCI Express Power Adapter Braided Sleeved Y-splitter Cable 9-inch(23cm) https://www.amazon.com/dp/B072JR4H3N?ref=yo_pop_ma_swf
Something like this https://www.amazon.com/gp/aw/d/B072JR4H3N/ref=mp_s_a_1_3?ie=UTF8&qid=1500413180&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=pcie+8+pin+splitter&dpPl=1&dpID=410GgH1mmaL&ref=plSrch
In order to power my L3+ mining rigs, I use an EVGA SuperNOVA 850W P2 power supply. Then all you need to buy is 4 - 8pin to 2x 8pin splitter cables.
Link to the power supply:
EVGA SuperNOVA 850 P2, 80+ PLATINUM 850W , Fully Modular , EVGA ECO Mode, 10 Year Warranty , Includes FREE Power On Self Tester, Power Supply 220-P2-0850-X1 https://www.amazon.com/dp/B010HWDOH6/
Link to splitters cables needed:
COMeap 8 Pin to 2x 8 Pin (6+2) PCI Express Power Adapter Braided Sleeved Y-splitter Cable 9-inch(23cm) https://www.amazon.com/dp/B072JR4H3N/
Just to confirm, something like this would work? I'd connect the female end of the splitter to my PCIe cable and then the dual 6+2pin ends of the splitter to my GPU right?
I would suggest that you get one of those pcie 8 pin female to dual 6+2 splitters. They range for 2 usd to 15 usd
COMeap 8 Pin Female to Dual 2X 8 Pin (6+2) Male PCI Express Power Adapter Braided Y-Splitter Cable 9-inch(23cm) https://www.amazon.com/dp/B072JR4H3N/ref=cm_sw_r_cp_apa_i_.QxTCbQJFT7D2
Something like this.
> Two. How can I safely power my risers?
Youre going to end up doing almost exactly what I did for 5x Vegas
I’d go with those risers, they’re what I used and are working flawlessly. To power them, you can use the 6 pin to SATA cables. You’d only need to take up two of your SATA ports on your main PSU for the risers, then you’d need the Molex to 6 pin for the Add2PSU. That would use up all of your SATA ports on your main PSU. The molex will otherwise be useless unless you’re going to power more fans with them.
I am powering two Vegas with my main PSU and 3 with my slave PSU, and I’m also powering my SSD with the slave. https://i.imgur.com/wPPd0YB.jpg
There’s a pic of my rig but it’s not the best lighting.
If you have those fancy cords that are 8 pin to 2x 6+2 then you can ignore the next paragraph. I only have one of those and it made life so easy but I was unable to find more
Your biggest problem is going to be running out of 8 pin to 6+2 cords, or running out of 8 pin VGA ports on your PSU’s. My gigabyte and XFX Vegas came with y splitters that made it so each card only took up one slot on the PSU but required two PCIe cords to plug into the y splitter and then the card. these may help you