Reddit reviews Du-Bro 499 Tru-Spin Prop Balancer
We found 7 Reddit comments about Du-Bro 499 Tru-Spin Prop Balancer. Here are the top ones, ranked by their Reddit score.
Built for the modeler who expects the very bestManufactured out of hardened materialBalances air props of all sizes and weights, boat props, spinners, car wheels, heli rotor heads, jet fans, fly wheels, etc.Securely centers and locks props on to the balancing shaft for utmost accuracyEach balancer comes complete with easy-to-follow assembly and prop balancing instructions
I hear good things about this guy:
http://www.amazon.com/Du-Bro-499-Tru-Spin-Prop-Balancer/dp/B0006N72Y8
Get a Dubro balancer and these should work good.
Use any nailpolish and apply incrimentaly to the back of prop towards tip untill perfectly balanced.
Rctimer is a bit slow with shipping but the price and CS is worth it.
http://rctimer.com/product-665.html
Or Amazon
https://www.amazon.com/Carbon-Fiber-Propellers-Pairs-1045/dp/B01I9EG08Y/ref=pd_sbs_21_img_2?_encoding=UTF8&psc=1&refRID=GT194G3NXFE9N4A476XT
This is a good balancer.
https://www.amazon.com/Du-Bro-499-Tru-Spin-Prop-Balancer/dp/B0006N72Y8/ref=sr_1_1?s=toys-and-games&ie=UTF8&qid=1487510925&sr=1-1&keywords=dubro
I've used these props on my setup and they worked pretty well. But if you're going that direction you'll also want to get a prop balancer and some hub nuts if you only have self-tightening props now.
If you've never balanced props before you'll need some fine grit sand paper (I prefer a sanding sponge) and some adhesive to remove/add mass. Often aftermarket props aren't perfectly balanced and if you want stability and zero vibration you'll want to balance em dead-on for some great performance flight.
The "Phantom 2" props are a lot better than the default phantom props, more surface area and more efficient. You get a LOT better battery time with them.
Just get the right one and you'll be ok.
I never bothered balancing my ZMR250 props, but for my big S800 Hexacopter I decided to get a Du-Bro 499 Tru-Spin Prop Balancer. It works amazingly well, and I like to think that it helped reduce jello in my video.
You'll need a prop balancer. This one on Amazon is pretty high rated but may be more than you need plus pretty expensive. I have something similar to this and it works for me. After you get one just do a search on YouTube for prop balancing.
http://www.amazon.com/Du-Bro-499-Tru-Spin-Prop-Balancer/dp/B0006N72Y8
You'll need a prop balancer no matter what. vibrations cause multirotors to fly poorly.
Blheli ESC seem to be more popular nowadays than SimonK. Pick an ESC that can handle your peak current, plus, some overhead. The bigger ones that can handle more power generally are only a few dollars extra and should be more durable.
I'd recommend getting ESC and motors that can run on 3S and 4S. Once you've been flying on 3S for a long time, going to 4S makes flying more fun and exciting because you've suddenly got more thrust!
I prefer carbon fiber for larger props. plastic will flex and flutter at high rpm, robbing you of thrust and increasing power usage.