Reddit reviews FastCap Long Nosed Marker, Black
We found 3 Reddit comments about FastCap Long Nosed Marker, Black. Here are the top ones, ranked by their Reddit score.
Long thin tip has a diameter of 1/16Black, permanent, waterproof marker1-1/8Reach tight spots with ease
Used a long marker, and angled it in maybe 20 degrees. Traced everything, then used a utility knife with a fresh blade and cut straight down. Peeled the majority of the material back with my fingers, Kaizen foam has layers you can peel back, but it won't come out in that layer perfectly clean. Test fit everything, cut away more where needed, in small increments because I wanted it super clean looking. Once I got the outline exactly how I wanted it, took a dremel with an abrasive stone head, and pointed it straight down and used it to clean up the lumpy, messy, bottom. Even punching straight down to remove material (especially for the magazine slots this was necessary) it was very effective. Just had to be careful with it, and it worked like a charm! Cleaned up the corners with some careful exacto knife work.
FastCap Long Nosed Pattern Marker https://www.amazon.com/dp/B002NQPEE6/ref=cm_sw_r_cp_apa_i_5k.1Db4YZ6WX8
(I didn't use this set, just using this link to show what I mean by abrasive stone head, I used a cylinder for the flat top, to flatten)
Oudtinx 100 pcs Abrasive Stone Points Electric Grinding Dremel Accessories Polishing Grinding Head Wheel Tool Kit For Dremel Rotary Tool (Red) https://www.amazon.com/dp/B07FN7G7JK/ref=cm_sw_r_cp_apa_i_Vn.1DbBJJHE0A
I found this long nose marker very helpful when shadowing some of the drawers in my tool box. https://www.amazon.com/dp/B002NQPEE6/
Also, fresh box cutters helped greatly.
You could always make shadowed socket holders out of Kaizen foam and place the sockets exactly where you want them. You can use a hot knife, long thin razor knife and/or a hole saw kit to make cut-outs for your sockets.
A wood burning kit like THIS works great on the foam for making finger grip holes and for cleaning up the bottoms of shadowed spots that are less than the thickness of the foam.
FastCap's long nose permanent markers are great for marking out the patterns of your sockets or other tools for you to cut on.
​
Just my two cents.