Reddit reviews goCoax MoCA Adapter, MoCA 2.5, 2.5Gbps Ethernet Over Coax, 1xGbE Port, White(WF-803M)
We found 8 Reddit comments about goCoax MoCA Adapter, MoCA 2.5, 2.5Gbps Ethernet Over Coax, 1xGbE Port, White(WF-803M). Here are the top ones, ranked by their Reddit score.
MoCA 2.5 can offer extremely high bandwidth of 2.5 Gbps. This bandwidth are shared by all the devices. That’s enough to allow streaming 4K/8K videos at the same time, while still playing an online game and transferring pictures from a computer or a mobile device to a television for viewing.Please buy at least two devices to enjoy the high speed MoCA 2.5. They can be connected to a variety of devices in the home. Maximum 16 devices in every home network.Since the wiring is already in existence, the only thing that is required is to attach MoCA devices at either end. Plug and Play.Unlike Wi-Fi, MoCA is based on coaxial cable, a shielded metal wire. That can minimize the external interference. Also the attenuation of the cable is very small, less than 8dB per 100 feet. Even with a 60dB path loss, you still can get a full-speed connection. It is almost comparable to Ethernet.Improve online gaming by lower latency. Latency is the quality of your network, it is the term used to indicate any kind of delay that happens in data communication over a network. When play games online, latency is critical. The lower latency, the better gaming experience. MoCA 2.5 can achieve 3ms delay. For Wi-Fi, the value is variable, from milliseconds to tens of milliseconds.
2 or 3 MoCA adapters - see if you can get MoCA 2.5
https://www.amazon.com/goCoax-Adapter-2-5Gbps-Ethernet-WF-803M/dp/B07XYDG7WN/ref=cm_cr_arp_d_product_top?ie=UTF8
1x wireless access point per area you want covered. For a 1600 sq ft house, 2 APs is likely adequate - if you have a wireless router, this would count towards that figure.
Ubiquiti AC Lite and TP-Link EAP225 are solid budget choices. The nanoHD is a decent step up but probably wouldn't profoundly improve your experience.
---
One trick to consider - drilling holes in closet ceilings and using brush plates. OR simply mounting the AP in a closet (not good for signal BUT it's out of the way and won't get complaints)
https://www.amazon.com/s?k=brush+plate
If you do that you could potentially get away without needing MoCA.
You can also consider using thin ethernet cables (not ideal, usually not to standard but if it's small enough that you get "wife approval" that's good)
Wi-Fi is certainly not faster than MocA 2.5. Moca 2.5 can provide a backbone capacity of 2.5 gbps and there is generally less interference on MoCA networks. I would not prefer a Wi-Fi mesh system over a MoCA network in terms of stability and performance. Yes, if you're installing a MoCa network and it is not working right it can be more difficult to troubleshoot. But if you got it working right it is rock stable in my opinion.
I would recommend you to use the Moca 2.5 backbone to provide your networking needs instead of using the wireless backhaul of those Wi-Fi mesh systems. You can still create a Wi-Fi network by using the MoCa 2.5 backbone, for example: Connect a switch to the MoCa adapter and then connect your console and a AP to the switch.
Currently the only available MoCa 2.5 adapters on the consumer market are from GoCoax:
https://www.amazon.com/goCoax-Adapter-2-5Gbps-Ethernet-WF-803M/dp/B07XYDG7WN/ref=sr_1_1?keywords=gocoax&qid=1572109549&sr=8-1
​
I also got these and this are my rates:
- Latency: https://imgur.com/a/0Olb2UY
- bandwidth: https://imgur.com/a/YA1a3FP
- PHY rates: https://imgur.com/a/Id0dAiU
​
If you are going for MoCa make sure you're using a splitter that supports the MoCa spectrum (1125 to 1675 MHz) and that the splitter is bi-directional , i'm currently using a 5 - 2000 mhz one. Depending on your situation you also might need a MoCa POE filter.
​
I dont know if you're interested in it but this is my topology at the moment:
https://imgur.com/a/4UxMLBU
MoCA has had a few generations. The 1Gbit/s (total speed across all nodes) MoCA 2.0 units are available at $65 or less if you shop around.
It appears that the 2.5Gbit/s MoCA 2.5 units have just hit the market, and this one is available for $60/ea. I think we're seeing adoption really start to pick up for homenet use, and more products are available, and that might be why prices appear to be dropping.
I think that 2 Uap ac lites for the basement and 2 pros for the first floor should be good. You should get a second opinion on this though. As for the MOCA, attach one of them to coax and router and one of them for each AP that you need MOCA for.
goCoax MoCA Adapter, MoCA 2.5, 2.5Gbps Ethernet Over Coax, 1xGbE Port, White(WF-803M) https://www.amazon.com/dp/B07XYDG7WN/ref=cm_sw_r_cp_apa_i_StWSDbHSW79YF
On the second floor if you want wifi, I would assume 2 lites will do, but again, get a second opinion.
Buy a pair of MoCA adapters and a WiFi AP.
2 of these: goCoax MoCA Adapter, MoCA 2.5, 2.5Gbps Ethernet Over Coax, 1xGbE Port, White(WF-803M) https://www.amazon.com/dp/B07XYDG7WN/
One of these:
TP-Link AC1750 Wireless Wi-Fi Access Point (Supports 802.3AT PoE+, Dual Band, 802.11AC, Ceiling Mount, 3x3 MIMO Technology) (EAP245) (Renewed) https://www.amazon.com/dp/B07HRVQK1G/
From what I’m able to find, this 2.5 adapter is around $10 cheaper than any reputable 2.0 bonded one. No brainer?
The way to do a MOCA setup is to buy a pair of adaptors like this one. You plug one adaptor into your router and the other adaptor into a wifi access point.
Ubiquiti's AC-Lite is a popular choice for a wifi access point.
If you want them to work together, you can disable the wifi on your current router and just add more wifi APs from the same system. Or you can just name both WiFi signals with the same name/password and that will usually work. If it doesn't, buy a few more APs.
Best moca device out there is you can’t run cat cable.
https://www.amazon.com/dp/B07XYDG7WN?ref=ppx_pop_mob_ap_share
I have gibabit fiber and I get full speeds all over my house hard wired now because I’m not able to rewire my house.