Reddit reviews GOOFIT 18 Poles Magneto Stator Coil for Yamaha Linhai 260cc ATV Scooter Engine
We found 1 Reddit comments about GOOFIT 18 Poles Magneto Stator Coil for Yamaha Linhai 260cc ATV Scooter Engine. Here are the top ones, ranked by their Reddit score.
18 poles magneto stator with double plug(3+2 pin).Inner diameter: 42mm/1.65",outter diameter:104mm/4.09",please check the detailed size with your stock one.Replacement for yamaha linhai 260cc ATV Scooter.Arrival within 1-2 days (Sold by GOOFIT and Fulfilled by Amazon),Arrival within 7-15 days (Ships from and sold by GOOFIT).Warranty:We are always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
After some testing, come to find out that my fuse had blown. I believe both my stator and ignition coil are bad. I'm getting this "CDI" (TCI) https://www.amazon.com/QUIOSS-Manco-Talon-Linhai-Bighorn/dp/B01MXFGLR5/ref=sr_1_1?keywords=8+Pin+CDI+Yamaha&qid=1566793139&refinements=p_85%3A2470955011&rnid=2470954011&rps=1&s=automotive&sr=1-1 , This stator https://www.amazon.com/gp/product/B01M0M7UIU/ref=crt_ewc_title_dp_2?ie=UTF8&psc=1&smid=A1U821NO27576X , and ignition coil https://www.amazon.com/gp/product/B07M5RNXXC/ref=crt_ewc_title_dp_1?ie=UTF8&psc=1&smid=A16CYTN3L0RHD9 . You can't use just any GY6 ignition coil, it has to be TCI compatible. A common identifier for a TCI compatible ignition coil is that it's grounded by two screws.
​
The wiring diagram is found here https://atvconnection.com/forums/attachments/1-engine-problems/6556d1345695123-linhai-300cc-no-spark-buyang300_wd.jpg . On my bike there is no pink wire, its instead Black/Blue. The pinout to the CDI (TCI) https://images-na.ssl-images-amazon.com/images/I/41p65nxdWsL.jpg. The "Trigger" are the wires coming from the stator which in my case are Blue/Yellow & Black/Red. Not sure which one is plus or minus. I think plus is Black/Red and vice versa (Take that with a grain of salt). Battery (Killswitch) is Blue/Black. Ignition coil is Yellow/Black. Ground is Green. The other 3 pins are not used. The Yellow/Black to the ignition coil needs to be on the left pin (with the screw upright) and the Killswitch/Battery wire to the right.
If you don't have a compatible harness you can crimp on these 2.8mm spade connectors https://www.amazon.com/s?k=2.8+spade+connectors&i=automotive&ref=nb_sb_noss_1 . Maybe after you confirm that everything works you can hot glue them in place.
I hope this helps someone.