Reddit reviews Leviton 47603-12B 4x12 Telephone Distribution Board
We found 2 Reddit comments about Leviton 47603-12B 4x12 Telephone Distribution Board. Here are the top ones, ranked by their Reddit score.
Fits easily into any Leviton Structured Media enclosure using a Leviton bracket (sold separately), or can be used as a stand-alone unit2 Year limited warranty12 modular RJ-45 jack outputs4-pair 110 type IDC inputsDetermine outlet locations and carefully plan cable routing to ensure the selected panel satisfies requirements
It's only twice as expensive if you get ripped off. I pay $75-$100 for 1000 ft of CAT6.
Also, your network drops are 100% useable for landline phone using RJ45 jacks. You just make a patch cable with an RJ45 plug on one end and an RJ11 plug on the other (to go from the wall jack to the phone), then go from your patch panel where all your lines terminate to a telephone distribution board. It's better practice to use a patch cable between the wall and the device as opposed to using a different wall jack.
Do you want both Ethernet and Phone on the same cat6 cable run? If not, then this is easy. An Rj-11 connector can be plugged straight into the RJ-45 jack. Just get a phone block (something like https://www.amazon.com/Leviton-47603-12B-Telephone-Distribution-Board/dp/B001UTCSI2/ref=sr_1_8?keywords=leviton+phone+module&qid=1558124763&s=hi&sr=1-8 ).
Then you just connect your line from the telco to the block and then run some RJ-11/RJ-45 patch cords between the block and your patch panel.
Now, if you want to run POTS and 10/100 Ethernet over the same cable (cannot do 1000, it uses all 4 pairs), then you need some Frankenstein-cables on each end that breaks out a pair for voice, 2 pairs for ethernet, and 1 unused pair.