Reddit reviews Leviton DZPA1-2BW Decora Smart Plug-in Outlet with Z-Wave Technology, White, Repeater/Range Extender
We found 8 Reddit comments about Leviton DZPA1-2BW Decora Smart Plug-in Outlet with Z-Wave Technology, White, Repeater/Range Extender. Here are the top ones, ranked by their Reddit score.
Z-WAVE PLUS CERTIFIED: requires Z-Wave hub such as SmartThings or WinkVOICE CONTROL: works with Alexa (Z-Wave hub required, Alexa device and hub sold separately)CONTROL: Provides 15A, 120 VAC NEMA 5-15R grounding receptacle for use with a wide variety of lamps and appliancesLEVITON: Making your home smarter and safer since 1906. Designed, engineered, and supported in USA with a 5-Year Limited .SMART: Protected memory maintains ON/OFF status of loads and during minor power fluctuationsRATINGS: LED and CFL up to 600W, incandescent/fluorescent/halogen up to 1800W, ½ HP Motor Loads
The only reason I see to do a switched outlet next to the bed is for a lamp. You could make it "smart" by either doing switched outlet like this or do a plug in module like this. You could then use your phone or a z-wave keypad/switch to control the outlet.
To use Z-Wave you would need a controller. If you're into DIY programming Home Assistant is the way to go. There are off the shelf controllers like Vera that do this without major programming.
If you're getting into switched outlets and switches i'd recommend going with something not WiFi, as you don't want to clog up your network.
I just set up something similar to automate watering of some trees we just planted that are on a drip line hooked up to a spigot. I used one of these:
https://www.amazon.com/dp/B00PVQFTHW/ref=cm_sw_r_cp_api_i_fbXdBbJZ06AT0
Plugged into one of these:
https://www.amazon.com/dp/B01NAO4B9Z/ref=cm_sw_r_cp_api_i_-dXdBb8ZM1Q55
Works great and no batteries. Ends up to be about the same price.
Edit: this is plumbed inside my house. Pretty sure neither of these products are rated for outdoor use.
No problem - it's this one: https://www.amazon.com/Leviton-DZPA1-2BW-Decora-Outlet-Technology/dp/B01NAO4B9Z/ref=sr_1_3?s=hi&ie=UTF8&qid=1527615028&sr=1-3&keywords=leviton+plug+in
I'd love to just replace a few of the wall outlets, but it's an old house without neutral wiring, so these things have to do.
I have a couple of the Leviton Decora Z-wave Plus smart plugs. I originally bought them to operate my Xmas lights (indoor and outdoor), but have since repurposed them to operate a fish tank light and a lamp in my daughters bedroom. They've been flawless, and with the Xmas season soon upon us again I'm likely going to buy a couple more.
I would look into getting a zwave plug-in outlet like this that you could place half way in between to function as a repeater. This options is good because if you get more permanent zwave devices that can fill this gap in the future you can easily move this outlet and use in other places.
I haven't used that, i have a few of these, i can confirm they work well (with a zwave dongle), but no energy monitoring.
Use this one: https://smile.amazon.com/Leviton-DZPA1-2BW-Decora-Outlet-Technology/dp/B01NAO4B9Z/ref=sr_1_1?ie=UTF8&qid=1512011048&sr=8-1&keywords=leviton+zwave+plug
I have a raspberry pi with a USB ZWave stick to control my home, my plants are monitored with this sensor, and I control the lights and humidifier with a zwave controlled plug