Reddit reviews Lumision ADD Circuit Blade Style ATT Low Profile Mini FUSETAP Fuse TAP + Fuse Set 5, 7.5, 10, 15, 20 AMPS
We found 5 Reddit comments about Lumision ADD Circuit Blade Style ATT Low Profile Mini FUSETAP Fuse TAP + Fuse Set 5, 7.5, 10, 15, 20 AMPS. Here are the top ones, ranked by their Reddit score.
Use with MINI LOW PROFILE ATM fuses up to 20 AMP each slot!SET Includes, Fuse TAP + 5 FUSES! 5A, 7.5A, 10A, 15A, 20APlugs into occupied or vacant energized fuse block slot.Provides one fuse holder to protect existing circuit, and a second fuse holder to protect new circuit16-gauge red wire lead for new circuit is 5 inches long; includes insulated crimp-type coupler butt connector.
Apeman = Lipo battery = lasts 1 or 2 summers, then dead.
---
Budget dash cams:
Best value:
Versatile: Mobius ($70-100 USD) (Requires separate purchase: Power cable or hardwire kit + Micro SD card + adhesive Mount) + recommended purchase Super capacitor - Good video quality, Fair build quality, Lackluster parking mode: Automatic, Not buffered, Requires hardwire kit with low voltage cut off feature to enable parking mode. No wifi/cellphone app. - This isn't the best dash cam in the world, but it is one of the smaller ones. It was made for the drone world, and repurposed for the dash cam world. Lacks Cloud feature. - No GPS - Lacks G sensor (because it is part of the drone world)
Budget Dual Cams:
Last year's Flagship Dual Cams:
This year's Flagship Dual Cams:
Taxi/Uber Cam:
Suggested Hardwire kits:
Things that make hardwiring easier:
using something like this:
http://www.amazon.com/Shipping-CIRCUIT-BLADE-PROFILE-FUSETAP/dp/B00K17A2E6
Allows you to tap into an existing fuse slot fairly easily, its pretty much unplug a fuse, plug it and two fuses in.. then you can wire to the existing wire and a metal to the frame point under the dash.
I have done this with my car since my cigarette lighters are always on.
I used it to wire one of these in: http://www.amazon.com/uxcell%C2%AE-Charger-Cigarette-Lighter-Female/dp/B00EZJBELQ
And I just plugged my cam into that.
Well, I have a splitter on that now and my cam and gps are on it.. but same thing..
I haven't gotten any rear cams yet, but I've got this cam up front in both cars (buy it directly from Spy Tec, it's also on Amazon but you might get a counterfeit), I'd recommend a capacitor cam in hot climates (a battery will deteriorate in the heat, the capacitor gives it just enough power to save the video when shutting down). I've got it mounted to the rear view mirror so it's less visible and won't fall off, and I've got it hardwired into my fuse box (tuck the wire up under the headliner along the top of the windshield, run it down the pillar, and use an add-a-fuse like this to connect it to a switched (only on when the car is on) fuse like a cigarette lighter).
I just installed this exact thing in my car (well, sort of, I got the version with a full size female USB port instead of the mini male port so I wouldn't be constrained to that one cable)
Anyway! That is not an inline fuse. That is the 12v to 5v step down, and you definitely need a fuse on top of that.
Here's everything I bought (note that you will need the fuse tap that fits your car)
https://www.amazon.com/gp/product/B00I3P6QQG
https://www.amazon.com/gp/product/B00K17A2E6
And with that and a 6 inch mini USB cable I had lying around, my G1WC is hard wired to my car!
One more note: all these EDO adapters are miswired. They put garbage on the data lines of USB, so your camera thinks it's connected to a PC. A trimmed piece of tape covering the center pins on the USB cable (there are four pins, 1 2 3 4, you need to cover 2 3) fixes that problem elegantly.
I attempted this.. In my experience its not possible. Instead i fuse-tapped from the internal fuse box an accessory fuse, so when the car turns on the lights are on.
During the day they unfortunately are on.. but you will not notice them unless they are super bright.
Cant remember what fuse i used... Think it was the 11th position or 9th position fuse (just test both) here
This is the [tap] (https://www.amazon.com/gp/product/B00K17A2E6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) and [lights] (http://www.ebay.com/itm/4pc-Red-LED-Under-Dash-Kit-Interior-Glow-Lights/271823827548?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649) i used, i also grabbed 20 gauge wire from home depot. (You will need to know how to wire them together)