Reddit reviews OMorc 6-in-1 60W Soldering Iron Kit - Adjustable Temperature, 5pcs Different Tips, Desoldering Pump,Stand, anti-static Tweezers and Solder Wire
We found 4 Reddit comments about OMorc 6-in-1 60W Soldering Iron Kit - Adjustable Temperature, 5pcs Different Tips, Desoldering Pump,Stand, anti-static Tweezers and Solder Wire. Here are the top ones, ranked by their Reddit score.
Heat up Fast. With inner-heated ceramic induction technology, the 60w soldering iron heats up fast and has a temperature dial with a range of 200℃ to 450℃ which makes it more versatile for all types of jobs.Better Heat Dissipation. Upgraded PCBA with Chip Fixed Resistor helps it get heat faster and dissipates heat more quickly. The solder tip with four ventilation holes has better heat dissipation than others.Snug and Secure Fit. The heat-insulated silicon grip handle provides you comfortable and secure way to use, slip-resistant and durable. LED indicator will be a good hint to avoid burning by accidental.Full Set Accessories. Five interchangeable tips for various jobs; A soldering stand for convenient use; Solder wire (1mm diameter, melting point: 183℃); Desoldering pump; Anti-static tweezers.Guaranteed Safety. Steel-pipe design can help heat dissipation and reduce the temperature of handle to ensure safety. Certified by CE, FCC and ROHS, it is made of high grade and eco-friendly material with exquisite craft for long lifespan.
It's not cheap because it's discounted, it's cheap because it's cheap.
It's sold under various rebrands on Amazon for the same price.
Don't fall into the trick of thinking you're saving a lot of money just because there's an inflated MSRP price that's listed.
I use something very similar to this, except it's 30 watts:
https://www.amazon.com/dp/B01HSXVR3A?ref_=ams_ad_dp_asin_2
That's probably the cheapest thing you'll find. I wouldn't recommend it unless you're going to solder once or twice a year. Believe me-it's a pain to do anything with an iron this cheap, and I'm getting a new one to replace it. I'm tired of buying extra-cheap stuff.
I've used this before, and it's actually not too bad in my opinion: https://www.amazon.com/Weller-SP40NUS-Medium-Soldering-Black/dp/B00B3SG6UQ/ref=sr_1_7?ie=UTF8&qid=1481862872&sr=8-7&keywords=soldering+iron&refinements=p_89%3AWeller
For $40, these two stations look pretty enticing:
https://www.amazon.com/Weller-WLC100-40-Watt-Soldering-Station/dp/B000AS28UC/ref=sr_1_5?ie=UTF8&qid=1481862523&sr=8-5&keywords=soldering+iron
https://www.amazon.com/Stahl-Tools-SSVT-Temperature-Soldering/dp/B0029N70WM/ref=sr_1_11?ie=UTF8&qid=1481862673&sr=8-11&keywords=soldering+iron
Disclaimer- I have never repaired a synth before.
Don't know the quality of this one, but found what looks like an identical kit with different name on Amazon. https://www.amazon.com/OMorc-60W-Soldering-Iron-Kit/dp/B01HSXVR3A - $17, and the one without the solder pump is slightly cheaper.
Depends on the LED strip you bought and how the RGB controller connects to the lights. Some solderless RGB connectors will match up with male breadboard pin headers, but not all of them.
Personally, I would avoid all solderless connections that don't have screw terminals. I have a mix of both soldered and solderless connections in my kitchen and I have had to go back and solder most of them due to failures of the solderless connectors.
Soldering is not difficult at all. Buy a cheap soldering iron and some thin (1mm) rosin core solder. Your connections will be much more reliable as a result.
Don't forget to buy extension wire. You will need some for both soldered and solderless connections.