Reddit Reddit reviews Phobya Adapter Cable, 4-Pin Molex to 4-Pin (PWM), 30cm, Sleeved, Black

We found 9 Reddit comments about Phobya Adapter Cable, 4-Pin Molex to 4-Pin (PWM), 30cm, Sleeved, Black. Here are the top ones, ranked by their Reddit score.

Computer Accessories & Peripherals
Computer Cables & Interconnects
Electronics
Computers & Accessories
Phobya Adapter Cable, 4-Pin Molex to 4-Pin (PWM), 30cm, Sleeved, Black
Connectors: 4-Pin to 4-Pin Molex and 4-Pin PWM fan connectorBlack sleeve, black connectors, black heatshrinkDimensions: Molex to Molex 7cm, Molex to 4-Pin PWM 30cm
Check price on Amazon

9 Reddit comments about Phobya Adapter Cable, 4-Pin Molex to 4-Pin (PWM), 30cm, Sleeved, Black:

u/Xazax310 · 6 pointsr/EtherMining

That to me seems like the 4-pin fan header on the card could be going awry. Try unplugging it, put in a 4-pin to Molex and connect to your PSU. This will make the fan spin at 100%, but it's a good way to test if it something with the fans or the fan controller on the board.
https://www.amazon.com/Phobya-Adapter-Cable-4-Pin-Sleeved/dp/B004X2XBMA

u/cecilkorik · 2 pointsr/pcmasterrace

Yes. In the very unlikely event you have trouble, you can get adapters that will take the PWM control input from the motherboard and combine it with voltage directly from the PSU like this or this to give you as many fans as your PSU will support (which is an unrealistically large number)

u/border_collie21 · 1 pointr/originalxbox

If you're planning on having fans on both the CPU and the GPU you could power one with the GPU fan connector and one with a molex to 3-pin fan connector, something like this https://www.amazon.com/Phobya-Adapter-Cable-4-Pin-Sleeved/dp/B004X2XBMA/ref=sr_1_2_sspa?keywords=molex+to+fan&qid=1556458628&s=gateway&sr=8-2-spons&psc=1&smid=A3GO5VFCNOM5I7

u/diab64 · 1 pointr/buildapc

I found a solution without having to do any DIY:

Coolerguys 100-240v AC to 12 & 5v DC 4pin Molex 2A Power Adapter + Phobya Adapter Cable, 4-Pin Molex to 4-Pin (PWM), 30cm, Sleeved, Black

Thank you for your advice though. I really hope it will have enough pull to work for me for this purpose.

u/JustJamesR6 · 1 pointr/pcmasterrace

If you need a 4pin adapter:
Phobya Adapter Cable, 4-Pin Molex to 4-Pin (PWM), 30cm, Sleeved, Black https://www.amazon.com/dp/B004X2XBMA/ref=cm_sw_r_cp_apa_i_u4W6CbA53RM7K

u/GrantHilbrands7 · 1 pointr/NZXT

Thanks for the reply, would this work? Phobya Adapter Cable, 4-Pin Molex to 4-Pin (PWM), 30cm, Sleeved, Black https://www.amazon.com/dp/B004X2XBMA/ref=cm_sw_r_cp_apa_1QZ-Bb2CEDYE6

If so, what does that do again what where would I plug it into?

u/ShetiPhian · 1 pointr/buildapc

" trapezoidal shape with two larger pins and two pin holes "

Sounds like molex.

​

Maybe a molex fan adapter with pass through.

Lets see if I can find you an image Here is one on Amazon (https://www.amazon.com/Phobya-Adapter-Cable-4-Pin-Sleeved/dp/B004X2XBMA)