Reddit Reddit reviews Plano Angled Tackle System with Three 3560 Stowaway Boxes, Fishing Tackle Storage, Premium Tackle Storage

We found 11 Reddit comments about Plano Angled Tackle System with Three 3560 Stowaway Boxes, Fishing Tackle Storage, Premium Tackle Storage. Here are the top ones, ranked by their Reddit score.

Fishing Tackle Boxes
Fishing Tackle Storage Boxes & Trays
Fishing Tackle Storage
Fishing Equipment
Hunting & Fishing
Sports & Fitness
Sports & Outdoors
Plano Angled Tackle System with Three 3560 Stowaway Boxes, Fishing Tackle Storage, Premium Tackle Storage
Fishing equipment tackle bags and boxesMain compartment presents utility boxes at a 15 degree angleDuraView covers and doorsIncludes three 2 3650 Stowaway utility boxes
Check price on Amazon

11 Reddit comments about Plano Angled Tackle System with Three 3560 Stowaway Boxes, Fishing Tackle Storage, Premium Tackle Storage:

u/Melphor · 6 pointsr/XWingTMG

This Plano box for storing my extra ships and components. I have 4.

This Plano tacklebox for storing and transporting the lists that I'm currently playing. You can definitely fit all that. I also recommend getting some bubble wrap. They sell it in large rolls at hobby stores like Hobby Lobby. I bought a roll for like $5 a couple years ago and I still haven't used it all. It makes for good padding.

u/RiverDogg · 3 pointsr/Fishing_Gear

I went through the same exercise and ended up with one of these:

I keep one sleeve empty and fill it with the gear I want when I get to the location.. Take that, my rod, and a pair of multi use pliers down to the actual spot.

u/JoshGiff · 3 pointsr/ImperialAssaultTMG

[Map tile storage](AmazonBasics Nylon CD/DVD Wallet (128 Capacity) Holds everything that has come out with a little room to spare. I keep my biggest tiles (5 or more spaces wide) separate from this in the tackle box.

[Everything but the large figures and map tiles](Plano Angled Tackle System I used pluck foam in each of the areas where I have painted figures to keep them from moving around. Bantha rancor and AT-STs don't fit but I used pluck foam to make an insert in my large core box to hold the large figures.

[Pluck foam](Pelican 1301 Replacement 4 Piece Pick N Pluck Foam Set for 1300 Case Used this stuff to line my figures in the tackle box and create an insert for the core box. Might be worth getting two sets to have extra plucked foam for minis in the tackle box. If they're unpainted you should be fine to do without though.

I can post pictures when I get home. I don't have everything from Jabba's realm in there yet and I haven't made the rancor insert yet but it definitely will fit.

u/NinjaDano · 2 pointsr/StarWarsArmada

I just recently got into the game myself and someone posted the Plano 732 Angled Tackle Box as a storage solution.

I have one of everything that's out right now (1 x ISD, 2 x VSDs, 1 x GSD, 1 x Raider, 1 x MC80, 1 x AF MII, 1 x MC30c, 2 x Neb-Bs, 2 x CR90s, 1 x Reb Sqdns, 1 x Imp Sqdns, 1 x Rogues & Villains, + extra dice).

All of it fits in that case with plenty of room to spare. I currently put the rulebooks, maneuver tool, range stick, ISD and VSDs in the flip top compartment. I put the AF Mk II and the GSD in the top left side bubble compartments (but as I expand into more AF MIIs, I'll just put those up there and the GSDs will go in with the others 'SDs). Home One/MC80 fits on the top right side bubble compartment. All the rest fits in the three main modular boxes in the center. My son and I use the two smaller modular compartments to store Empire and Rebel specific markers, cards, and whatever our current fleet set up is in those.

I'll post pictures of the set up when I get a chance so you can see examples.

... $40 at Wal-Mart.

u/LictorSevas · 2 pointsr/ImperialAssaultTMG

I use this Plano box for all of the figures. I use the side draws for deck boxes separated for hero abilities, imperial agendas, shop items etc. Up top I have the hero cards and all the cards from our current campaign.

I keep all of the tokens and dice in a 3D printed holder I found on etsy.

As for the map tiles I keep those in the gambit and shadow boxes. Go 7 gaming had some nice organizers for that. They also have organizers for all the boxes but it's easier to haul around the Plano case and the two smaller boxes then to try and carry everything.

u/ptowngiant · 2 pointsr/ImperialAssaultTMG

I use and a zipup binder. I only play skirmish and the app, so my system is based around that. I have every expansion except General Weiss.

The two compartments on the top corners hold at-st, at-dp, and the Rancor.

The top opens and holds one of the smaller boxes (normally stored in the sides) two smaller boxes, and my supply deck for the app. Also the tank. I keep all tokens and dice in that box so it comes out onto the table easier. The smaller box is a token/dice set for a friend, and the other smaller box is for map tokens (crates, objectives, etc.) My doors are stored in their as well.

The left side compartment contains all the tiles for the app (core box tiles) and any skirmish maps I want to play. The right side contains all the campaign hero cards (and their upgrade cards) in individual bags (so a hero card and their upgrades are together).

The middle is used for the rest of the figures, one for rebels, one for scum, one for imperials.

I have a zipup binder that has card holders. The order I have in there is:
-Deployment cards sorted by faction then by points
-Bots and shapeshifter cards
-Command cards alphabetically
-Rewards alphabetically
-Mission cards by map alphabetically
-Skirmish map sheets alphabetically (in page holders)

The rules are kept in the inside pocket on the binder.

All the other tiles, cards and extra tokens are stored in the core box.

u/dx_dt2 · 2 pointsr/steroids

You bro, you definitely need an upgrade, gotta show some respect to the gear haha. This one looks nice

u/icepyrox · 2 pointsr/XWingTMG

So I own this one. It comes with 3 3700 trays like the 1374 uses and 2 3600 trays that the 1363 (the size in between your linked ones) uses. The 1354 uses 3500 trays and I looked at getting one of those trays for token storage to toss in the top because after trying out the 3600 trays, I couldn't imagine the 3500 series being worth anything more than that. The 3600 snugly fit x-wings, and actually I use one for dial/base/pegs/boards for individual ships. There is an appreciable difference between the 3600 trays and 3700 trays (which nicely fit all the ships) and if that type of difference holds to the 3500 (which looking at the ones in the store suggests they do), I can't imagine the 3500 (and therefore the 1354 box that uses them) holding ships well at all and possibly not even any large ships.

tl;dr- It's half price because you are shrinking the tray compartments down in all 3 dimensions, not just fewer compartments, but smaller ones that I would not recommend trying blindly.

u/mkell43 · 1 pointr/electronic_cigarette

I use the Plano 732. It holds all of my mod/atomizer/etc. stuff as well as all (most of) my DIY stuff. It's basically just a holder for a bunch of compartmentalized plastic boxes.

It's pretty f-ing big though.

u/logicthug · 1 pointr/electronic_cigarette

I ended up getting one of these for most of my vape stuff at home. Works pretty well as a coilmaster kit fits right in the top perfectly.