Reddit reviews Pledge Floor Finish Gloss 27 Oz

www.amazon.com/gp/aw/d/B002YC438C/ref=mp_s_a_1_8_a_it?ie=UTF8&qid=1521409024&sr=8-8&keywords=pledge+floor+care+finish




This is it

Future floor finish is the best way. Paint a little on the joint and it evens itself out into the crevices and tightens it up. Plus it can be removed if you end up with too much in the joint.

Pledge Floor Polish

One source. Look for Pledge or Johnson’s product that has terms like future floor care, floor care with future shine, etc. Here in the US it is about $5-7 USD in most stores in the floor care aisle. I got some in the UK that was a tad cloudy, but it dried just as clear. I forget the name...

The original name, back in the 70’s, was Future. We all call it that today who were introduced to its features then.

Awesome! Don’t be shy to share some pics!

If you’re not using it already, the [Pledge Floor Gloss](Pledge Floor Finish Gloss 27 Oz https://www.amazon.com/dp/B002YC438C?ref=ppx_pop_mob_ap_share) definitely helps a lot for the dotting step so it’s worth tracking some down. As I mentioned in one of my replies above, the only way I can tell which of the models were painted with the catgutt wash recipe vs. GW Skeleton Horde is by looking at the dots. The first 5 I painted were without the floor gloss and the dots are not as neat because I was basically trying to paint them on vs. depositing a small bead onto the model.

If you can’t get that stuff where you are, I think you would get similar results using [Acrylic Flow Improver](Winsor & Newton Professional... https://www.amazon.com/dp/B0060KRGQA?ref=ppx_pop_mob_ap_share).

Let me know if I can be of any help as you paint yours up. Catgutt has been really helpful to me and I’m happy to pay it forward!

After you finish building and doing the primary paint, put on a coat of Future (that is the brand)- it will be shiny, but this will help protect the model and let you decal and weather it easier. After you get the decals on and your weathering (including panel lines), you can go shiny with another coat of Future, or go matte (normal) with a spray matte finish ($few at your local model store, or here is the one I like).