Reddit reviews Premium Life 5.5" KELLY Hemostat FORCEPS (Straight)

As others have said its really easy even if you have no experience, there are plenty of youtube videos for resources. An AR is by far the easiest firearm to work on. I started off in your position a few years ago hesitant to mod and now I barrel my own ARs, its addictive and very easy with the hardest part spending money on tools but deals can be had. Lots of great resources out there as well dont let it intimidate you - heres a wall of text of some tools you might want to consider if you're looking to assemble stripped lowers or do minor gun work.


I purchased this set of punches for less than $7 a few years ago looking to do the same as you but being on a college budget. You'll definitely want brass but steel/'chrome' punches have their place (peening roll pins). This is far from the "perfect" set and is chinesium but 4 AR builds, many other firearm disassembles (stripping 3+ glocks, 4+ M&P Pros as well as a couple Rugers to bare frame then back again) and 4+ years later they are still holding up (punches will bend, you can bend them back, especially the small ones, if they get deformed from striking you can file/sand them flat again) but if you have extra cash/are willing to spend more there are many options out there that are oriented towards gunsmithing specifically, I didnt have the money at the time for them and will wait until these give out or I come across something they wont work with before I purchase something else.

You may also want to look into a roll pin starting punch if you are building ARs (or anything that uses roll pins)

But I find Hemostat Forceps to work excellently for roll pins ('pinch' the pin in them, get it started, remove forceps and use punch) (you will not need this for installing a trigger, only roll pins such as a bolt catch)

Also if you're striking punches dont use a regular hammer (chips into your eyes arent good) I use a Nylon Hammer like this

There are other things for barreling such as torque wrenches and vices etc. but the above will allow you to assemble a stripped AR lower and have many other applications for gun work. Good luck any questions dont hesitate to ask.

If you would like some tweezers (or I prefer surgical clamps/hemostats) I'm willing to buy some if you would like to add them to an Amazon wish list and send me the link. Going by hand is painful. (Seriously, go for the hemostats, they're amazing.)

You're way off there. This is a serious medical problem. He needs this: http://www.amazon.com/5-5-KELLY-Hemostat-FORCEPS-Straight/dp/B000QWK174/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1376118524&sr=1-1-catcorr&keywords=medical+instruments+clamp
Also, the "go see a urologist" idea is good plan.

That's a hemostat forceps.

https://www.amazon.com/Premium-Life-Hemostat-FORCEPS-Straight/dp/B000QWK174/ref=sr_1_6?ie=UTF8&qid=1527609308&sr=8-6&keywords=hemostat

Kanthal is typically used and will be your most commonly seen wire. I only know of Gplat as an alternative (I used it... not worth the price increase IMO) I get mine from Amazon, I originally started with 28 gauge, then a buddy let me borrow his 26 gauge, that was good too. I purchased some 24 gauge and it drains my batteries hard (which is why I want a dual box mod.)

Yes, a mod is the housing. Then you will need your atomizer and battery.

I started dripping with the IGO-w atty with the Smok Magneto Mod. Biggest problem I had with it is it was small and i had to drill the air holes. I still use the Magneto.

I would never suggest tank anything. I tried both the genuine and the clone russian 91% and it was a terrible experience.

So, for a beginner getting into dripping I would suggest these parts:

[Plum Veil Atomizer] (http://www.eciggity.com/plume-veil-clone-by-tobeco/) (Note! I have not bought anything from this site.)

ANY single battery 18650 mechanical mod. They all realistically do the same thing. RipTrippers.com does a lot of reviews, they should be able to point you in the right direction. I do however suggest one with a magnetic fire button instead of spring. (It will lower resistance and last longer because springs are weaker than magnets)

Atleast 2 [18650 Sony batteries] (http://www.myvaporstore.com/SONY_VTC5_18650_2600mAh_Battery_Flat_Top_30A_p/sny65026-f.htm)

Charger I chose the two battery one for money purposes but I suggest the 4 since it's only like $5 more and can charge a myriad of batteries

[These clamp things] (http://www.amazon.com/5-5-KELLY-Hemostat-FORCEPS-Straight/dp/B000QWK174/ref=sr_1_6?ie=UTF8&qid=1414788271&sr=8-6&keywords=medical+clamps) makes building much easier

I use these but a lot of people use nailclippers

[Wire] (http://www.amazon.com/Genuine-Lightning-Vapes-Kanthal-Resistance/dp/B00JVXVKB0/ref=sr_1_2?ie=UTF8&qid=1414788396&sr=8-2&keywords=28+gauge+kanthal+wire) either 28 or 26 gauge is what I would recommend.


Cotton Balls

[Ohm Tester] (http://www.amazon.com/gp/product/B00MBNCOMG/ref=s9_simh_gw_p328_d0_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0J7AHRP45YSC4DHAS7DB&pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846)

Drill bits, allen keys or screwdriver to wrap coils around (i usually use Allen Keys)

Another Screwdriver for you builds

Tweezers are nice for accurate adjustments

Some people suggest a torch.... it's a waste of money for most builds. The main idea behind them is they are used to burn off any chemicals on the wire... but when you are done building you just fire it a few times before you put cotton in them and it does the same thing. Some builds need a more flexible wire... that is the only time you will need it.

Note: I 100% support the use of Clones, especially when you are starting out your vape life. They save so much money and do an adequate (if not better) job of most authentics.

Sorry, I should have specified locking forceps or hemostats. This is a random example pulled from Amazon. They are super useful when sewing through layers or heavier fabrics and the needle gets stuck. Grasp it with the forceps and pull it right through!