Reddit reviews SE Heavy-Duty 12-Piece Hollow Leather Punch Set with Zipper Pouch - 791LP
We found 6 Reddit comments about SE Heavy-Duty 12-Piece Hollow Leather Punch Set with Zipper Pouch - 791LP. Here are the top ones, ranked by their Reddit score.
Hard-to-find, hollow punch set for precise holes in leather or plastic12 individual punch sizes (inches): 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/32", 5/8", 3/4"Machined diamond-patterned grip for a secure, no-slip hold under the hammerHeat-hardened, high carbon steel construction for long lasting sharpness and durabilityComes in a zip-up pouch for easy storage and transportation
Hollow punches
https://www.amazon.com/SE-791LP-Heavy-Duty-12-Piece-Hollow/dp/B000KE17JO/ref=sr_1_3?ie=UTF8&qid=1518233355&sr=8-3&keywords=hollow+punch+set
Pretty much any punch should work. If you have a leather punch then go with that.
Otherwise you can find some cheap hollow punches on amazon.
What about something like this?
I used a 50 duro sheet with adhesive on it from amazon (currently out of stock, but this is what i've used on all of my boards).
I cut it roughly to size for the bottom of the case and then use these punches to cut out holes for the screw standoffs, the jumper panel and the USB connector (hint: if you lay it in the bottom of the case with the adhesive side still covered and push down, you will end up with little holes punched in the covering to the adhesive that you can use as a guide for the punches).
Once it's cut properly, you take off the backing for the adhesive and carefully place it in the case. It's a delicate operation because the adhesive is pretty tough and you really don't get a second chance (using the screw standoffs as a guide is really the best way to do it).
I've done this in about 6 boards now and it's always worked out really well.
I cant imagine making.a large hole in the middle of someone's carpet. I'd terminate my own ends. But you can try this:SE 791LP Heavy-Duty 12-Piece Hollow Punch Set with Zipper Pouch https://www.amazon.com/dp/B000KE17JO/ref=cm_sw_r_cp_api_PIL6xbS7ZK0DP
Anyone have a hole punch recommendation?
I started with a rotary punch that I bought when I made my wife a belt from a belt blank.
I recently bought a double shoulder on 8 oz veg tan for making more belts. I bought this kit for the holes:
https://www.amazon.com/gp/aw/d/B000KE17JO/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
These things are awful. I'm pounding the shit out of them and taking forever to punch each hole. Looking for recommendations for a kit that will work better.