Reddit reviews Swarfega Jizer Degreaser 500Ml

I have had a lot of success using 'Professional! Super Premium Polishing Paste'. I'm in the UK and ordered mine from:
http://sportingcutlery.co.uk/b234
You can use it by hand with a cloth or with a buffing wheel on a Dremel. It is best of you can remove the bearing before you use it as it will find its way in. However, I have had no issues using it with a bonded bearing. I wash the whole spinner with dish soap and use a brush to clean the bearing out. I then flush with water and use Jizer by Swarfega to ensure the bearing spins properly and is water free. https://www.amazon.co.uk/d/h7b/Deb-SJZ500ML-Swarfega-Jizer-500ml/B003TEMZ70/ref=sr_1_1?ie=UTF8&qid=1491408162&sr=8-1&keywords=swarfega+jizer
A can of compressed air then cleans the remainder out.
You will be left with a very clean and gleaming spinner. Further 'polishing' can be done with Renaissance Pre-Lim surface cleaner https://www.restexpress.co.uk/acatalog/Renaissance_Pre-Lim_Surface_Cleaner.html should you think you want to. Being a fountain pen fanatic, I then protect the finish with some Renaissance Micro-Crystaline Wax Polish. You can use this on loads of stuff and a little goes a very long way! https://www.restexpress.co.uk/acatalog/Renaissance_wax.html
Hope the above proves useful.