Reddit reviews Ubiquiti U Fiber Multi-Mode SFP 1G - UF-MM-1G

found these on amazon 7in length

https://smile.amazon.com/gp/product/B079G56L38/ref=ox_sc_act_title_2?smid=A27DUHPPTQX1VZ&psc=1

I guess ill use this SFPs

https://smile.amazon.com/gp/product/B01MY5498F/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1

Yes, I have a similar setup and use these specifically for my UniFi switches

U Fiber Multi-Mode SFP 1G

and StarTech.com 1m Fiber Optic Cable - Multimode Duplex 62.5/125 - LSZH

It’s a little expensive to connect but does open up additional ports and can be managed similarly.

I ordered that exact same jumper in the same size and I bought the Ubiquiti SFP modules.

https://www.amazon.com/gp/product/B01MY5498F/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Both arrived today. Just waiting on the UDM-Pro. It's scheduled to be delivered on Thursday

I'd suggest using a TP-Link MC220L and a TP-Link TL-SM311LM SFP module on the Orbi end. Go with OM2/OM3/OM4 multimode fiber, you'll probably have to hire someone to terminate it unless you get a pre-terminated cable. You'll need LC or LC duplex connectors on the fiber to connect to the TL-SM311LM SFP.

On the other end you could also use the TP-Link MC220L + TP-Link TL-SM311LM pair, or use a TP-Link switch with a SFP port and use TP-Link TL-SM311LM in that. TP-Link doesn't seem to have low port count switches with SFP ports though. Mikrotik RB260GS could be an option if you want a 5 port switch with an SFP module: https://www.amazon.com/Mikrotik-RB260GS-CSS106-5G-1S-Ethernet-Original/dp/B00GAZ2HHS
Using a managed switch lets you read out some info and temperature from the SFP modules, but it's not really required.

It seems like TP-Link TL-SM311LM is very overpriced on Amazon. So Ubiquiti UF-MM-1G (a pair of SFP modules) as a cheaper option - https://www.amazon.com/U-Fiber-Multi-Mode-SFP-1G/dp/B01MY5498F
You can also buy some used SFP for $3 on ebay, but those come with some shipping time. Here's an seller I've used:
https://www.ebay.com/itm/Cisco-GLC-SX-MM-30-1301-02-1000BASE-SX-SFP-850nm-GBIC-GLC-SX-MM-Transceiver/163606064239

You can also get media converters, SFP modules and pre-terminated fiber all from fs.com. They have tons of nice and cheap networking and fiber stuff.

Easiest option is just to get a pair of MM 1G fiber transceivers:

https://www.amazon.com/dp/B01MY5498F/ref=cm_sw_r_cp_awdb_t1_EYnZCb5X0QM6J

And some MM fiber:

https://www.amazon.com/gp/aw/d/B00552PLMK?psc=1&ref=ppx_pop_mob_b_asin_title#

I got 2 of each (transceivers come in pairs so I ordered 2 sets to aggregate, this of course is optional but mine was for my AP which also can aggregate so I figured why not) to connect my Xg16 to my us-8-150w.

Never had any issues and no warranty worries since they are actual Uniquiti transceivers.

Edit:

Also, technically you could use 10G transceivers (https://www.amazon.com/U-Fiber-Multi-Mode-SFP-10G/dp/B01N0XR1RL/ref=mp_s_a_1_4?keywords=ubiquiti+10g&qid=1556930057&s=gateway&sr=8-4#) on the xg16 as some people of mentioned, but I’m not sure why you would since they cost more than twice as much and won’t ever give you an advantage since in most normal situations if you are using 2 sfp+ connections that are close you would just use dac cables anyway.

it should ... i know ubnt makes their own spf's but i havent had an issue with generic 1gb sfps on unifi devices. 10 gb i have ... its cheap enough to try

edit: if you want ones that are made by ubnt order https://www.amazon.de/Ubiquiti-Fiber-Multi-Mode-Module-2-Pack/dp/B01MY5498F/ref=sr_1_3?ie=UTF8&qid=1538861292&sr=8-3&keywords=UF-MM-1G and a https://www.amazon.de/LogiLight-Glasfaser-Patchkabel-125%C2%B5-LC-LC/dp/B00HQICBCE/ref=sr_1_4?s=computers&ie=UTF8&qid=1538861394&sr=1-4&keywords=om4

I have a UDM-Pro on the way as well with a US-24-500W I'll be connecting it to. I couldn't find ANY SFP (non-plus) jumpers to go between the two, since the US-24-500W only has SFP ports. I instead ordered these to create a short jumper between the two:

https://www.amazon.com/U-Fiber-Multi-Mode-SFP-1G/dp/B01MY5498F/ref=sr_1_4?keywords=UF-MM-1G&qid=1566242692&s=gateway&sr=8-4


https://www.amazon.com/Meter-Multimode-Duplex-Fiber-Optic/dp/B079G56L38/ref=sr_1_4?keywords=.2m+fiber&qid=1566242724&s=gateway&sr=8-4

Both the UDM-Pro and the items above are coming in tomorrow... Excited to get it all hooked up and going.

u/zeke73

This fella right here

option-1 GlC-t sfp and rj45 cable.

https://www.amazon.ca/10Gtek-SFP-GE-T-1000Base-T-Transceiver-connector/dp/B00U77IJ2M/ref=sr_1_3?keywords=glc-t&qid=1555522623&s=gateway&sr=8-3

​

option -2 Multi-Mode SFP 1G or 10G and fiber cable.

https://www.amazon.ca/U-Fiber-Multi-Mode-SFP-1G/dp/B01MY5498F/ref=sr_1_4?keywords=sfp+mm&qid=1555522707&s=gateway&sr=8-4

option -3 DAC cable

https://www.amazon.ca/10Gtek-SFP-H10GB-CU1M-10GBASE-CU-Passive-1-Meter/dp/B01D3015AW/ref=sr_1_4?keywords=sfp+-h&qid=1555522843&s=gateway&sr=8-4