Reddit reviews USB Console Cable USB to RJ45 Cable Essential Accesory of Cisco, NETGEAR, Ubiquity, LINKSYS, TP-Link Routers/Switches for Laptops in Windows, Mac, Linux (Blue)
We found 17 Reddit comments about USB Console Cable USB to RJ45 Cable Essential Accesory of Cisco, NETGEAR, Ubiquity, LINKSYS, TP-Link Routers/Switches for Laptops in Windows, Mac, Linux (Blue). Here are the top ones, ranked by their Reddit score.
Replaces RS232 (DB-25/DB-9) serial port perfectly, connects to any laptop/PC's USB port directly to a console port like a charm. No more RS232 Female and male adapters; Note: This is Not a USB Ethernet Cable.An essential accessory of branded routers, switches, firewalls and wireless LAN controllers with CONSOLE port, such as Cisco, Ubiquiti, Juniper, Fortigate, Mikrotik, TP-Link, Huawei, HP ProCurve devices and more. Our unique cable works flawlessly and quickly on laptop and desktop computerMicrosoft (HCL) certified to be compatible with Windows, no CD required for as the drivers are part of the OS distribution. If the drivers can't be automatically installed, please contact us at any timeFull support for 32-bit and 64-bit Windows, MAC OS, Linux and Android, except Chrome OS. For details of OS compatibility, please scroll down this page and take a look at 'Product description'USB2.0 (1.1 compatible); CONSOLE's DTE Pinouts: RTS(1), DTR(2), TXD (3), GND(4), GND(5), RXD (6), DSR(7), CTS(8); so Moyina RJ45 cable is 1-CTS, 2-DSR, 3-RXD, 4-GND, 5-GND, 6-TXD, 7-DTR, 8-RTS. Cable length 1.8m/6ft, Maximum RS232 speed 500kbaud
Gotcha buddy.
https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K/ref=mp_s_a_1_3?keywords=usb+serial+rj45&qid=1565091778&s=gateway&sr=8-3
This what I use. Imagine you are using Windows. Double check to make sure your serial port is showing up in hardware manager. If you can see the port in the program but it’s not connecting make sure the baud rates match.
Or you made need a USB to serial adapter if the array doesn’t have an rj45 comms port and has a db9 comms port.
https://www.amazon.com/Sabrent-Converter-Prolific-Chipset-CB-DB9P/dp/B00IDSM6BW/ref=mp_s_a_1_3?keywords=usb+to+serial&qid=1565092473&s=gateway&sr=8-3
No. What you said is:
> serial (ethernet type)
What you actually have is a serial cable with an RJ45 connector. This is not Ethernet. The serial cable requires a specific type of communication protocol, which is not compatible with Ethernet.
You need to buy a separate adapter. You can either buy a USB to DB9 connector, or if you're certain that all of your switches are RJ45 serial connectors, you can buy a direct USB to RJ45 serial connector like this one:
https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K
I'm not sure which Surface you have, so I don't know what ports you have available to you. But you can just as easily buy USB-C adapters if you have a USB-C port.
Look at this link right here:
https://www.amazon.com/gp/offer-listing/B000FIS86U/
That will get you a used Cisco Catalyst WS-C2960G-48TC-L for around $150.
That is 48 ports of 10/100/1000 with no PoE (which your current TP-Link doesnt provide either).
But it runs real Cisco IOS.
We can troubleshoot the shit out of your current symptom with a switch like that.
Yeah, you'll need to spend a day or three learning how to configure & troubleshoot it.
But we can get you up and running in about one hour.
Just be sure to buy a USB to RJ45 console port adapter (and a spare is always wise) like this:
https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K/
You need a USB to serial adapter, like https://www.amazon.com/TRENDnet-Converter-Prolific-Chipset-TU-S9/dp/B0007T27H8/ref=sr_1_3?ie=UTF8&qid=1499385175 or https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K/ref=sr_1_8?ie=UTF8&qid=1499385175&sr=8-8&keywords=usb+to+serial+adapter . Anything with Prolific will work, or SiLabs (also seen in Cygnal stuff). Both have OSX drivers. I think the Prolific drivers may be built in these days.
Anyway - Install the drivers and then you can use screen or other tools to attach to the tty, e.g.
screen /dev/tty.<something> 115200. All the USB to serial stuff will generally present as a TTY device in /dev.USB Console Cable USB to RJ45 Cable Essential Accesory of Cisco, NETGEAR, Ubiquity, LINKSYS, TP-LINK Routers/Switches for Laptops in Windows, Mac, Linux (Blue) https://www.amazon.com/dp/B01AFNBC3K/ref=cm_sw_r_cp_api_SNCKBb8F54K4K
You need a USB to serial adapter. That just changing the pins. This is what your looking for...
https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K/ref=sr_1_1?keywords=cisco+console&qid=1573919372&sr=8-1
Read the whole thing.
You will need a console cable if it didnt already come with one.
>and a gaming PC with an asus z170 board I'd like to use as my console.
You don't access the console full-time. Usually you just use the console cable for:
Once the switch is set up, you just access it via its management IP over something like SSH.
>there is no way to connect a DB9 to RJ45 console cable to my board
I'm assuming your board has USB, and the switch comes with a console cable it looks like, so you can use either:
I use the latter. With an RJ45->DB9 adaptor, I'm able to connect to basically any switch, new or old.
These switches are not meant to be configured using a UI. Usually these are setup to use SSH (or telnet if you are ok with your password being sent unencrypted) or SNMP. There is a GUI option for these but you have to make sure to load the correct files and set it up for it, it's not default and you may need a service contract to download the right files. The reason for no UI is that it's not necessary and can actually slow you down if you need to configure a lot of these at a time. If I need to add a command to over a hundred switches, I don't want a GUI. I would want to push it via SSH or if I do have to log into every switch, I'd have the commands needed in a text editor so I can copy and paste.
​
These switches by default out of the box are usually configured using the console port on the back using a special rs-232 to rj-45 cable. There are some USB to RJ45 Serial Cables out now that will allow you to connect.
i just get the green prompt,btw this is what i am using:
https://www.amazon.com/gp/product/B01AFNBC3K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I ordered a couple of the USB to RJ45 off of amazon and they are great. Way better than using the adapters and messing with cables. Works with both my mac and PC out of the box.
https://smile.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K
You will want to hook into the MGT port with normal ethernet, then then follow the Using Telnet section.
The console port will require serial, which can be used with something like this that integrates the usb-to-serial and RJ-45 adapter: https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K/ref=sr_1_3?ie=UTF8&qid=1539109077&sr=8-3&keywords=usb+serial+cisco
Edit: you can also use the WebUI from the MGT port
https://www.amazon.com/dp/B01AFNBC3K
works great with my cisco devices
you'll need something like this. https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K
If you have a serial port you can probably find something similar with serial. Not all console cables are the same though, the pinout for a juniper cable is different from the pinout on a cisco console cable.
Usually switches run RS-232 over RJ45, not Ethernet. We usually use a combination of a USB-Serial adapter and DB9 to RJ45 Rollover
But I also see now we have USB to RJ45 RS-232
Then we connect using
screen /dev/ttyUSB0 9600Resetting Catalyst Switches to Factory Defaults
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-2900-xl-series-switches/24328-156.html
​
USB Console Cable
https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K/ref=sr_1_6?crid=YZQA4LLNYATX&keywords=usb+to+serial+adapter&qid=1568230551&s=gateway&sprefix=usb+to++ser%2Caps%2C136&sr=8-6