Reddit reviews uxcell 5/8" Dia Diamond Coated Glass Tile Cutting Hole Saw Silver Tone

Hey folks, for less than $10 you can get a 5/8" diamond hole saw at most hardware stores and make your own bottle bongs.

That's what this subreddit is all about, engineering your own smoking devices. It's really not difficult.

Go to your local hardware store and look for a 5/8" diamond hole saw bit. This will make holes that can accommodate standard 1/2" glass/metal downtubes with a bit of room to fit a rubber grommet. A 1/2" hole saw will work, but you'll have to enlarge the hole slightly. You can use these bits with an electric drill or a Dremel.

If you don't have access to a headshop in your area for downtubes and bowls/funnels, you might want to order online. Otherwise, you're going to need to start looking for aluminum or steel 1/2" tubing with screw threads.

http://www.amazon.com/Amico-Diamond-Coated-Cutting-Silver/dp/B0087Y81MU/ref=pd_sim_hi_5

I have this one in 14mm. I think if I bought it a little bit bigger, it would work with normal hoses. But I didn't buy it for hookah use, so I'm okay with that. So far, I've drilled 30 or so holes and the bit still looks as good as new. No need to pay $20+ at Home Depot when this does the job for 1/4 of the price

http://420armory.com/home/product/glass-hole-saw-bit-large/ This company offers the rubber grommet and downstem to fit the hole as well, but the hole saw itself is $10.

You can probably get a 5/8" hole saw for $5 or less at your local hardware store. https://www.amazon.com/uxcell-Diamond-Coated-Cutting-Silver/dp/B0087Y81MU/

Dude what tinkering. There's like 2 minutes and 45 seconds of effort there, max.

Get a 5/8" diamond hole saw at a hardware store or home improvement store, and some 5/8" rubber grommets. Then you can drill bottles to your heart's content, and the holes will fit a standard 1/2" downstem, glass or metal.

Don't even fucking mess with plastic for a smoking device, ffs.