Reddit reviews Wiha 26199 Slotted and Phillips Screwdriver Set in Rugged Canvas Pouch, 8 Piece
We found 8 Reddit comments about Wiha 26199 Slotted and Phillips Screwdriver Set in Rugged Canvas Pouch, 8 Piece. Here are the top ones, ranked by their Reddit score.
Exact fit precision machined tipsWiha exclusive CRM-72 special tool steelHandles proportioned to blade size for optimum torqueFree turning precision finger control capMolded on handle for permanent bond to bladeBlade high alloy chrome-vanadium-molybdenum tool steelRotating cap for precise turning and control with fingertipsPrecision molded on tapered handle made from high quality plastic, cadmium freeTip is precision ground for exact fit, hard chromed finish non-slip surfaceGuaranteed quality made by Wiha
My laptop bag:
It's pretty clear I primarily work in server rooms and datacenters :P
I recently did a bunch of research on tools, and came up with a few good options:
For (bigger) diagonal cutters/pliers, I think the most BIFL are NWS with their "Titan finish". Knipex is a fairly close second, but I like the finish on NWS better. Both can handle hard and medium hard wire (including nails and screws) without a problem, unlike most Klein, Snap-On, etc. The biggest issue is finding NWS in the US. The NWS Fantastico Plus are the best diagonal cutters I've ever laid my hands on.
For precision cutters/pliers, Xuron. They're semi-flush (Xuron call them flush, but I'd still call them semi-flush) micro sheer cutters are great but thankfully don't seem to nick up easily like (Xcelite, Snap-On, etc.) flush cutters do. I like the ones with that are ESD safe, with extra long handles, and the lead retainer best if you're going to be populating a lot of circuit boards. Otherwise, their cheaper models are just as nice.
Wiha precision screwdrivers. I've given this set as a gift before. Wera for the bigger stuff if you need it. Wiha or Wera bits (only larger sizes, I've never found precision bits I've particularly liked).
Klein to fill in gaps.
Bondhus hex keys.
Find a nice used Fluke multimeter on eBay. 89IV go for under $200 and have pretty much identical features to the 189 (believe the 189 mostly just has a bigger inductance/capacitance range). Most universities will have someone tasked with calibration/maintaining the measurement equipment. Make friends and he'll probably calibrate it for you/teach you how/just let you jump in and try. Mine was falling out of the box after UPS drop kicked it to my door, but the calibration was still super boring as nothing needed adjustment.
Hakko or Weller soldering station. Easy to find tips, especially for Weller. WESD51 dropped to $99 on Amazon a couple times in the last year, great time to scoop one up for little more than the analog version. The Stahl Tools one Amazon sells is also good for dirt cheap, but not really BIFL; good luck on finding tips. Metcal is too rich for my blood, but if you ever happen across one that is cheap.
Kester "44" solder, accept no substitute. 63/37 or 60/40, but since the spool will last you half a lifetime, I'd probably go with the 63/37.
I have a love/hate relationship with wire strippers. Something like this usually gets the job done, but sometimes you'll get wire with a strange jacket size and they'll fail. For the automatic kind, this style works ok (especially if you adjust it to what you're stripping), but I usually like this style better; again, as long as the jacket isn't too small and you wire is in the right range. Sadly, I probably most often grab for cheapies like this. The adjustment screw is great if you have to do a lot of a certain size, but I tend to free hand them. It takes quite a bit of practice, but once you get the hang of it, it's the fastest. Thermal wire strippers are just too pricey for the home user, especially if you want to do PVC, teflon, etc. jacketed wire.
I also have a love/hate relationship with crimpers. I have some crimpers I got for Anderson Powerpole connectors from West Mountain Radio (largely because I couldn't believe how cheap they are-- connector-specific crimpers are usually many times the price they charge) and they were great for the Powerpoles. I even bought some of the other die sets, but I've been less happy with those. I often end up using a similar pair to these or the die on a pair of Klein lineman's pliers for the larger crimps.
We buy the techs these:
https://www.amazon.com/Wiha-26199-Slotted-Phillips-Screwdriver/dp/B000NZ5QG0/ref=sr_1_12?ie=UTF8&qid=1480694593&sr=8-12&keywords=wiha+screwdriver
In a couple set variations - also one of these
https://www.amazon.com/Megapro-151NAS-Original-Driver-Yellow/dp/B004VJY0ZM/ref=sr_1_1?ie=UTF8&qid=1480694651&sr=8-1&keywords=megapro+screwdriver
Also a USB 3.0 portable drive, usb drive adapters, and some thumb drives
Everything else they fill their own bag with from the office supply. Ethernet cables, CAT6 ends, velcro, etc
We have a Brady Labeler and various other tools they can take as needed for site work as well.
I've used the ifixit kits and have been really underwhelmed personally.
https://www.amazon.com/Wiha-26199-Slotted-Phillips-Screwdriver/dp/B000NZ5QG0
Wiha 26199 screwdriver set is amazing. It's not very much money and I use it all the time.
Amazon link
Step 1: Buy a multimeter. I prefer the Fluke 87v http://amzn.com/B0002YFD1K Sure it's $387, but it'll pay for itself eventually.
Step 2: You'll need to take apart the charger. A good set of screwdrivers would definitely help. http://amzn.com/B000NZ5QG0 It's only $40. Wiha maybe isn't the best, but I like them and they do offer a 100% satisfaction guarantee.
Step 3: Once you open it up, you can start testing it with the multimeter. Inevitably, however, you'll probably have to solder something. Hakko is a popular brand for good reason. This one is under $100 AND it comes with wire cutters: http://amzn.com/B00AWUFVY8
Step 4: After you put it back together and find out that it's still not working, buy a replacement charger.
For future reference, part sizes are listed in the hardware guide, which can be found in the question thread, but the size screws you need are here. The hardware guide links tow 3/16 but lists 1/8 (which is the correct size) so use the 1/8 I linked.
As far as tools, Sneakerhead is correct, pivots are t8 and body screws are t6. You may need 2 t6's (one to hold the other side while screwing in). You can also get a set. I've linked Wiha drivers which will last you, but you can go with whatever brand you prefer