Best electronic cooling fans according to redditors

We found 22 Reddit comments discussing the best electronic cooling fans. We ranked the 5 resulting products by number of redditors who mentioned them. Here are the top 20.

1. NTE Electronics 77-4010D24 High Speed Fan, Ball Bearing, Thermal Plastic Wire Lead, 40 mm L x 40 mm H x 10 mm T, 24 VDC, 7000 RPM, 7.73 CFM

6 mentions
NTE Electronics 77-4010D24 High Speed Fan, Ball Bearing, Thermal Plastic Wire Lead, 40 mm L x 40 mm H x 10 mm T, 24 VDC, 7000 RPM, 7.73 CFM
High SpeedBall Bearings26 AWG Red (+) and Black (−) Leads11.8" (300mm) Lead Length
Read Reddit commentsView price

2. SUNON KDE0505PFV1 11.MS.A.GN DC Brushless Tubeaxial Fan, 16" Leads Connection, 38 dBA, 50 mm L x 50 mm W x 10 mm H

1 mention
SUNON KDE0505PFV1 11.MS.A.GN DC Brushless Tubeaxial Fan, 16" Leads Connection, 38 dBA, 50 mm L x 50 mm W x 10 mm H
Vapor bearing13 cfm air flow38 dba noiseVoltage (vdc) 5
Read Reddit commentsView price

3. SUNON ME60151V1-0000-A99 DC Brushless Tubeaxial Fan, 12" Leads Connection, 25.2 CFM, Vapo Bearing, 1.92 Watt, 36.2 dBA, 60 mm L x 60 mm W x 15 mm H

1 mention
SUNON ME60151V1-0000-A99 DC Brushless Tubeaxial Fan, 12" Leads Connection, 25.2 CFM, Vapo Bearing, 1.92 Watt, 36.2 dBA, 60 mm L x 60 mm W x 15 mm H
Vapor bearing25.2 cfm air flow36.2 dba noiseVoltage (vdc) 12
Read Reddit commentsView price

4. ORION FANS Case Fan OD4010-24HSS | 24VDC | 0.09A | 40x40x10mm | 6.7CFM | 25dBA | 6000 RPM | Wire Leads | Crosses with 414 (EBM/PAPST)

1 mention
ORION FANS Case Fan OD4010-24HSS | 24VDC | 0.09A | 40x40x10mm | 6.7CFM | 25dBA | 6000 RPM | Wire Leads | Crosses with 414 (EBM/PAPST)
Flow Rate: 6.7 CFM | 6,000 RPMFlow Rate: 6.7 CFM | 6,000 RPMAgency Ratings: ULCross with EBM/PAPST: 414
Read Reddit commentsView price

5. 4 Hand-Held Avon Sun Mini Sport Fans

1 mention
4 Hand-Held Avon Sun Mini Sport Fans
Read Reddit commentsView price
Next page

Subcategories:

Computer case fans

Top Reddit comments about Electronic Cooling Fans:

u/g2g079 · 3 pointsr/FlashForge

https://www.amazon.com/gp/aw/d/B00ZSA83EW?psc=1&ref=ppx_pop_mob_b_pd_title

I just started unscrewing stuff to be honest.

u/e22f33 · 2 pointsr/3Dprinting

I just installed this fan. Still on first print, but so far it's very quiet and might have fixed my intermittent under extruding issue that I believe was caused by PTFE tube overheating.

ORION FANS Case Fan OD4010-24HSS |... https://www.amazon.com/dp/B005T7CQHO?ref=yo_pop_ma_swf

u/DangitDave · 2 pointsr/airsoft

Spare Goggles

I like this brand to keep as a loaner. I keep 2 spares in the duffel in case mine goes down or if the a player forgets his/hers. Inexpensive, dual pane + anti-fog only kills out if you are pouring sweat, and fits asian faces very well.

Handheld Fans
Great for warm or humid days and you can't take off your gear to cool down. I keep a G&P Distress marker fan on me to cool down between rounds.

Electrolyte Gel Packs
Great for keeping cramping and general dehydration down. Gatorade works too, but I keep these in handy for people who only drink water all day and begin to look flushed.

u/Raiku17 · 2 pointsr/3Dprinting

I replaced my hotend fan with this

https://www.amazon.com/gp/product/B00ZSA83EW/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

u/de_argh · 2 pointsr/ender3

https://smile.amazon.com/gp/product/B00ZSA83EW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

u/Man_of_Many_Hats · 1 pointr/ender3

I'm in the middle of converting mine to an e3d v6 clone, bullseye mount, bltouch clone (that I had working well before), stock parts cooling fan and this 40mm heatsink fan:

https://www.amazon.com/gp/product/B00ZSA83EW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1.

How are you mounting everything?

u/peringa · 1 pointr/ender3

Thanks for the information!

​

Fot the Hero me, i need this fan?: https://www.amazon.co.uk/gp/product/B07BS8334N/

Or this kind? https://www.amazon.com/gp/product/B00ZSA83EW/ref=ppx_yo_dt_b_asin_title_o09__o00_s00?ie=UTF8&psc=1

​

I am litle confused about the correct fan! Thanks

u/EmailLinkLost · 1 pointr/ender3

Here is a quickly made fan blade based on a render of the Ender 3. It's assuming that your hotend fan blade broke, not part cooling. I have no clue if it will work or not. Use super glue to attach it. https://www.thingiverse.com/thing:3758044

Honestly, it probably won't work out well. You might consider a replacement fan from Amazon. But this might get you going.

u/greecher · 1 pointr/CR10

All are sunon fans.

  1. Back of case fan
  2. front of case fan
  3. Power supply fan

    I screwed up on what I'm getting for ps fan, you need the ones listed above.

    Edit: tried a thicker 25mm ps fan, it's a nogo, get the 15 mm one listed above.